Active Member
|
[China]
Address: Room 36B1-B2, Building C, Electronics Science & Technology Building Shennan Mid-Road, Shenzhen China
Contact name:Sharon Yang
Anterwell Technology Ltd. |
|
|
Programmable IC Components C8051F340-GQR Full Speed Digital IC Circuits
C8051F340-GQR Full Speed USB Flash MCU Famil
Analog Peripherals
- 10-Bit ADC (C8051F340/1/2/3/4/5/6/7/A/B only)
• Up to 200 ksps
• Built-in analog multiplexer with single-ended and differential mode
• VREF from external pin, internal reference, or VDD
• Built-in temperature sensor
• External conversion start input option
- Two comparators - Internal voltage reference (C8051F340/1/2/3/4/5/6/7/A/B only)
- Brown-out detector and POR Circuitry USB Function Controller - USB specification 2.0 compliant
- Full speed (12 Mbps) or low speed (1.5 Mbps) operation
- Integrated clock recovery; no external crystal required for full speed or low speed
- Supports eight flexible endpoints
- 1 kB USB buffer memory - Integrated transceiver; no external resistors required On-Chip Debug
- On-chip debug circuitry facilitates full speed, non-intrusive in-system debug (No emulator required)
- Provides breakpoints, single stepping, inspect/modify memory and registers
- Superior performance to emulation systems using ICE-chips, target pods, and sockets Voltage Supply Input: 2.7 to 5.25 V
- Voltages from 3.6 to 5.25 V supported using On-Chip Voltage Regulator
HIgh Speed 8051 µC Core
- Pipelined instruction architecture; executes 70% of Instructions in 1 or 2 system clocks
- 48 MIPS and 25 MIPS versions available.
- Expanded interrupt handler Memory
- 4352 or 2304 Bytes RAM
- 64 or 32 kB Flash; In-system programmable in 512-byte sectors Digital Peripherals
- 40/25 Port I/O; All 5 V tolerant with high sink current
- Hardware enhanced SPI™, SMBus™, and one or two enhanced UART serial ports
- Four general purpose 16-bit counter/timers
- 16-bit programmable counter array (PCA) with five capture/compare modules
- External Memory Interface (EMIF) Clock Sources
- Internal Oscillator: ±0.25% accuracy with clock recovery enabled. Supports all USB and UART modes
- External Oscillator: Crystal, RC, C, or clock (1 or 2 Pin modes)
- Low Frequency (80 kHz) Internal Oscillator - Can switch between clock sources on-the-fly Packages
- 48-pin TQFP (C8051F340/1/4/5/8/C) - 32-pin LQFP (C8051F342/3/6/7/9/A/B/D)
- 5x5 mm 32-pin QFN (C8051F342/3/6/7/9/A/B)
Temperature Range: –40 to +85 °C
Absolute Maximum Ratings*
| Parameter | Min | Max | Unit |
| Ambient temperature under bias | -55 | 125 | °C |
| Storage Temperature | -65 | 150 | °C |
| Voltage on any Port I/O Pin or RST with respect to GND | -0.3 | 5.8 | V |
| Voltage on VDD with respect to GND | -0.3 | 4.2 | V |
| Maximum Total current through VDD and GND | 500 | mA | |
| Maximum output current sunk by RST or any Port pin | 100 | mA |
