Active Member
|
[China]
Address: Room 36B1-B2, Building C, Electronics Science & Technology Building Shennan Mid-Road, Shenzhen China
Contact name:Sharon Yang
Anterwell Technology Ltd. |
|
|
D7E-1 Specifications of Vibration Detection Switch
CONSTRUCTION
Outline dimensions DRWG. NO. 64231377-0
Switching mechanism To output the ON/IFF singal by mechanical switching
of the internal switch contact by vibration
Enclosure rating IP67 (Only internal switch)
Operating seismic intensity 130 to 200
Target value not to operate at less than 130 gal,
and operate within 5 sec. At 200gal.
Returning angel 2.5 degree MIN from the horizontal
On time 50 msec. MIN
Return mechanism Self-reset
Permissible mounting leverl +-0.5 degree MAX from the horizontal
Gradient of sensitivity 20gal MAX 1 degree
Contact form Single pole single throw(NC contacts/ slow action)
Returning time 1 min MAX (mounting level +-0.5 degree MAX)
Terminal 187 quick connect/solder terminal (thickness=0.5mm)
Mounting Pitch: 30mm 2 screws(M3)
Soldering Soldering Iron: temperature 350+- 10 ℃ 3sec. MAX
| Measuring Parts | Insulation resistance (250 VDC Megger) | Dielectric strength (50 to 60 Hz 1 minute) |
Between each terminal Of the same polarity | 100 mΩ MIN | 250VAC |
Shock during transporting
Must be free from any malfunctions both electrically and mechanically.
The box which packaged switches are dropped from 50+-1cm toward a composite plate(thickness 30mm MIN)
Terminal strength
Must be free from any malfunctions both electrically and mechanically
Apply force to the terminal 78.4N vertically and 49N horizontally 1 minute each
ENVIRONMENT CHARACTERISTICS
Operating temperature and humidity
Temperature: -25℃ to +60℃
Humidity : 40 to 95 %RH
