Active Member
|
[China]
Address: ROOM 1105, KAITAI BUILDING, RUIAN, ZHEJIANG,CHINA
Contact name:sales
WENZHOU GOODPLUS MACHINERY CO.,LTD |
|
|
Disposable Earloop N95 Face Mask Making Machine High Production Efficiency
The KN95 automatic mask production line is used to produce KN95 mask with a built-in nasal bridge,which is composed of a piece of molding equipment, ear strap welding equipment, mask folding equipment, and folding welding equipment.The equipment has the advantages of stable production performance, fast filming speed,low defect rate and easy to operate.
| Size | 6800mm(L)×3600mm(W)×1900mm(H) |
| Mask specification | 175*95mm |
| Production efficiency | 100-120PCS/min |
| Cutting layer | 1-4 layers(standard 3 layers) |
| Qualification rate | 98-99% |
| Failure rate | 2% |
| Weight | ≤2100kg, ground load bearing > 300kg |
| Working power | 220VAC ± 5%, 50z, rated power about 6.5-8.5KW |
| Compressed air | 0.5 ~ 0.7MPa, the use flow rate is about 300L / min |
| Operating environment | temperature 10 ~ 35 ºC, humidity 5-35% HR No flammable and corrosive gas, no dust (cleanness not less than 100,000). |
Machine advantages:
1. Cutting roller
We use the chrome steel to cover the rubber roller both sides .So
that the rubber is not crack from side after extended periods use.
2. Traction roller
We use the silicone rubber materials instead of the butyronitrile
materials .The silicone rubber materials is good abrasion
resistance and will not crack
3. PLC touch screen
We use DELTA group brand PLC touch screen .
4. Mask nose strip tension controller
We use Mask nose strip tension controller .This device can avoid
the nose strip differ in length .
5. Nose strip straight- feeding device
We use Nose strip straight- feeding device , It can ensure the nose
strip be feeded straightly in the processing, so the finished
mask will be flat and artistic.
7. Non woven raw materials sensors
We use Non woven raw materials sensors,once the raw materials use
up,machine will stop automatically
8. Raw materials tension controller 1
We use the Raw materials tension controller to avoid the materials
plugging .
9. Raw materials tension controller 2
Our machine is equipped with two braking ways . One is belts
pressing and another is screw fixing . You could choose either one
or use both according to your need.
10. Raw materials EPC device
We use raw materials EPC device ,to do materials adjustment.
11. Machine door lock
We just door lock ,with out the key,worker can not start the
machine.
12. Frequency converter
We use DELTA group brand frequency converter .
13. Machine body and materials feeding connect board,We connect
Machine body and material feeding frame with connecting boards,so
that the running of whole machine will be very
stable.
14. Electrostatic eliminator
In our machine we have one electrostatic eliminator . to eliminate
non woven mask surface static.
15. Machine motor
Our geared motor is new type and no need refuel.
16.Fan
We install the fan near the ultrasonic horn ,to Lower the horn
temperatures,to to extend ultrasonic life.
| tion and commissioning. | Due to the special period, party A(Supplier) is unable to provide on-site installation and debugging service. After installation and debugging, party A(Supplier) shall notify party B(Buyer) to accept the equipment. Upon completion of acceptance, party B(Buyer) should ship the whole machine.Provide non - contact installation instruction such as instructional video and remote video instruction. Non-epidemic period, We will send 1~2 engineer for installation, training and testing in customers' factory, offer complete technical support, after-sale service, maintenance skills training. The air ticket, hotel and food accommodation shall be offered by the buyer and need to pay 100 USD/day/person as technical fee. |
| Warranty period and service |
|
| Delivery time | 30 days |
FAQ
Q1:What's your warranty policy?
A1:The Seller will guarantee the machine for 18 months since the
date of shipment(that is leaving from Seller's factory) or the
seller will guarantee the machine for 12 months since the date of
starting installation and adjustment, whichever comes first.
Q2:What's your minimum order quantity?
A2:Min order quantity:1 set or by negotiate with each other.
Q3:What package do you use for the product?
A3: Be Coated with anti-corrosion oil, and covered with plastic
film, then packed in wooden box.
Q4:Do you have technical instruction if I buy your product?
A4:Please read the user manual carefully for your reference, we
have detail instruction on it. If your problems still can not be
solved, welcome to contact us for help.
Q5:What is your overseas service?
A5:We will provide high quality overseas service ,our technical
staff will be able to provide you with technical support, for you
personally to overseas assembly and test equipment.
Q6:Will you conduct training for our staff here?
A6:Yes, we will provide technology support to factory technology,
training for the relative person.
Q7:What are your terms of payment?
A7:We accept T/T, L/C.
