Guangzhou Hiseer Air Conditioning Co.,Ltd |
|
High efficiency air ground source heating and cooling installation
AW13/B-DNNNS, HISEER air-source heat pump, often used in moderate
climates, moves energy from the air into the building for
heating or cooling and domestic hot water. Even at temperatures as
low as -20˚C, an air source heat pump can supply significantly more
energy than it uses – and with no local C02 emissions, it helps
reduce impact on the environment.
HISEER AW13/B-DNNNS heat and cool system with stainless steel
cabinet, 380-415V/3/50Hz, all year round used, energy saving heat
pump: heats & cools your house as well as offers domestic hot
water.
HISEER heat pumps adopt the following world famous parts:
Heat pumps are measured by their coefficient of performance (COP). The COP for air source heat pumps is very similar to that for ground source heat pumps at approximately 2-4. With a COP for instance of 4, 4 units of heat are produced for every 1 unit of electricity consumed. (The three free units of heating were extracted from the outside air). Even with ambient air temperatures of -10 to -15 degrees Celsius, an air source heat pump can extract useful heat (i.e. > 1 unit of heat generated per unit of electricity consumed).
Advantages:
AW13/B-DNNNS technical data
AIR TO WATER HEAT PUMP | AW13/B-DNNNS | |
Heat output/Power consumption at 7/35℃ | kW | 14.0/3.7 |
Heat output/Power consumption at 7/45℃ | kW | 13.5/4.3 |
Heat output/Power consumption at 7/55℃ | kW | 13.2/5.5 |
Heat output/Power consumption at 2/35℃ | kW | 12.0/3.6 |
Heat output/Power consumption at 2/45℃ | kW | 11.8/4.3 |
Heat output/Power consumption at -7/35℃ | kW | 9.0/3.6 |
Heat output/Power consumption at -7/45℃ | kW | 8.9/4.4 |
Cool output/Power consumption at 35/7℃ | KW | 12.2/4.3 |
Starting current | A | 55 |
Power |
| 380-415V/3PH/50Hz |
Compressor |
| HITACHI scroll |
Condenser |
| Brazed plate heat exchanger |
Nominal flow heating medium | l/s | 0.67 |
Internal pressure drop at nominal flow | kPa | 24 |
Air flow | m3/h | 5000 |
Nominal output fan | W | 300 |
Max outgoing heating medium temperature | ℃ | 55℃ |
Dimensions(HxWxD) | mm | 1075x1105x505 |
Pipe connector |
| DN25 |
Weight | kg | 175 |
The above data is tested by EN14511