CD1series electric wire rope hoist has the feature of compact
structure,safe,heavy lifting capacity,easy maintenance,
it is very popular during the light lifting equipment.
CD1 model electric hoist has two type,one is fixed type,the other
is moving type,it can be mounted on the i-beam,the CD1 motor hoist
can lift the goods with single speed,and the MD1 with double
Applicable scope and working conditions
The CD1 motor hoist applies to such an environment as no faire, no
explosive danger, no corrosive media and no dirt exist. And the
temperature is between 20°C below zero and 40°C up zero, the
wetness is no higher than 85%, the applicable power source is under
Feature of CD1 motor wire rope hoist:
The third-class dead axel helical gear transmission structure is
adopted;gear and gear axel are made of heat treated
alloy steel,case and case cover with precise assembly and good seal are made of quality cast iron;the reducer is
independent,so it is easy to load and unload it.
It has device with up and down stoke protection of break off
limiter and can cut off main circuit in an emergency,which ensures safety operation of
electric block.Electric elements are of long service life and operational safety.
It uses GB1102-74 (6 × 37 +) hoist steel wire rope which is durable
The hoist motor of CD1 electric hoist is conical motors of
relatively stronger starting torque to brake asynchronous motor and does not need extra
arrester.The motor's load duration factor is 25%.the motor uses B grade and F grade insulation.
It is hand operated,easy to handle and has two modes of cord
operation and cordless remote control
Hoists Enquiry information needed:
2. Lifting height/Voltage
3. Lifting speed and running speed requirement.
5. your name of seaport.
1. We only manufacture the high quality hoist
2. Different power supply available
3. OEM requirement are welcome
4. Color can be custom made
Our payment terms:
T/T, Western Union,L/C(amount should be up to USD50,000)
Our contact way
Beijing Tengli Hengxin Crane Machinery Co.,Ltd
|Model||CD0.25T||CD 0.5T||CD 1T||CD 2T||CD3T||CD 5T||CD10T||CD16T||CD20T|
|Standard lifting height (m)||3-9||6-12||6-30||6-30||6-30||6-30||9-30||9-18||9-18|
|Lifting Speed (m/min)||8||8||8||8||8||8||8||8||8|
|Running Speed (m/min)||20||20||20||20||20||20||20||20||20|
|Wire rope type||6X9||D-6X37+1||D-6X37+1||D-6X37+1||D-6X37+1||D-6X37+1||D-6X37+1||6X37+1||6X37+1|
|I-beam track type||16-22b||16-28b||16-28b||20a-32c||20a-32c||25a-63c||25a-63c||45a-63c||50a-63c|
|Loop track minium radius m||0.8||1.5||1.5-4||2-4||2-4||2.5-5||2.5-9||3-4.6||3-4.6|
|Working Duty||Mid M3||Mid M3||Mid M3||Mid M3||Mid M3||Mid M3||Mid M3||Mid M2||Mid M2|