Home Companies Anyang Xinheng Machine Tool Co.,Ltd.

CK6163 Hot selling cnc lathe machine China mainland spindle bore 100mm

Active Member

Contact Us

[China]

Address: Industry park,Pingyuan road,Hi-tech zone

Contact name:Chirlie

Anyang Xinheng Machine Tool Co.,Ltd.

CK6163 Hot selling cnc lathe machine China mainland spindle bore 100mm

Country/Region china

Product Details

 
This Cheap cnc lathe machine series is economical and practical CNC lathe, which are not only suitable for all kinds of complex shape of the shaft, sets, disk parts of the internal and external surfaces, conical surface, but also can be used in automotive, petroleum, military and other mechanical processing.The lathe has advantages such as high efficiency, low scrap rate, good consistency, etc. CKB series economic practical CNC lathe adopts the whole bed, guide rail width of 600 mm, with a half closed loop control function, is widely applied in industries such as automobile, petroleum, military industry machining of large parts.

Main configuration:


The control system uses a wide number of Funuc oi-TF.

X/Z motor adopts funuc servo motor 12Nm/22Nm.

The GSK feed servo motor is used for the X / Z motor.

The tool holder adopts vertical four-position electric knife holder.

X / Z to the use of domestic famous precision ball screw.

Spindle bearings using domestic famous,

Chuck with manual jaw self-centering chuck

Move the tailstock manually

Spindle hydraulic automatic four gear speed, stepless speed within the file speed.

The main electrical components used Schneider.

 

 

Other configuration:

 

Rail width 550, bearing 2t, can be changed 3t .

Fuselage with semi-protective.

Can add chip removal machine, the additional price calculated separately.

5 meters above the lead with a screw support.

The air box can be air conditioned.

Best brand cnc lathe machine china manufacturer

Product parameters

 

ITEM

UNIT

CKP6163

CAPACITIES

Swing over bed

mm

630

Swing over carriage

mm

340

Max.length of workpiece

mm

1000

Max.turning length

mm

850

Pan of guideway

mm

550

SPINDLE

Spindle nose

 

C11

Spindle bore

mm

100

Taper hole of spindle

 

1:20/120

Range of spindle speeds

r/min

<=1000

No.of spindle speeds

 

Manual four gear, the file Promise

Center height from bed

mm

315

Chuck

mm

325

FEED

Min.feed increment

mm

0.001/0.001

Rapid speeds

mm/min

3000/6000

Max.travel

mm

390

TURRET

Turret working position

 

V4

Indexing time

s

2.4

indexing repeatility

mm

0.008

Section of tool shank

mm

32X32

TAILSTOCK

Dia. of tailstock quill

mm

100/250

Travel of tailstock quill

mm

100/250

Taperhole of tailstock

 

Morse5

OTHERS

Workpiece accuracy

 

IT6~IT7

Surface roughness

μm

Ra1.6

Main power

kw

11

Lathe mass

kg

5300

Length

mm

3445

Width/Height

mm

1800/1880

CNC System

 

FANUC Series 0i-mate-TD/0i-

Product features

  • Easy operation
  • Reasonable structure
  • Attractive price
  • Maintenance simple
  • High efficiency
  • Automatic control

Product details

Best brand cnc lathe machine china manufacturer

Best brand cnc lathe machine china manufacturer

 

 

The main components are: spindle box, exchange gear box, feed box, slide box, tool rack, tail frame, light bar, screw, bed foot and cooling device.

Spindle box: also called headstock, it is the main task of the main motor rotation movement coming after a series of variable speed institutions make main shaft gets the different rotating speed of the positive and negative two turn, at the same time the spindle box gives impetus to the movement into the box.

 

Feed box: also called feeding box, feed movement are installed in the feed box shift gear, adjust its shift gear, can get the required feeding or pitch, through light poles or screw would transmit the motion to head for cutting.

Screw and light bar: to connect the box with the slide box, and the movement and power of the feed box to the slide box, to make the slide box to get the longitudinal straight movement.

 

Knife rack: there are two layers of skateboard (medium, small skateboard), the saddle and the frame body together. Used to install the lathe tool and drive the lathe tool for longitudinal, transverse or oblique movement.

Tail frame: mounted on the bed guide rail and moved vertically along this guide rail to adjust its position. The tail frame is mainly used to install the top, to support the long work piece, also can install the drill bit, reamer and so on the hole processing.

 

Company Information

 

about us

Anyang Xinheng Machine Tool Co. Ltd. is a professional machine tool manufacturer since 1949. Our factory covers an area of more than 30000 squares meters, equipped with our updated manufacturing facilities. We have LATHE, CNC LATHE, PIPE THREAD LATHE, SPHERE TURNING LATHE etc. We have attained ISO9001:2000 International Quality Control System Certification. Our products are sold both at home and abroad, and they are very popular around the world. Welcome to contact us !

 

Best brand cnc lathe machine china manufacturer

 

Main products:

 

Best brand cnc lathe machine china manufacturer

customer feedback

 

COUSTOMER FEEDBACK

The high performance bench lathe machine:

The lathe machine is high work efficiency,we are very satisfied.

From Adeline

General horizontal lathe machine:

To our surprise, the lathe worked very well without any problems.

Charlene from US

 

The sdandard type cnc lathe equipment:

The cnc machine equipment is working fine.

Santhosh Aravind from india

 

The high presion cnc lathe machine:

We are very pleased with this lathe machine,it woks fine with no problems.

Jose Garcia from US

FAQ

 

1. What's your delivery time?

It usually take 15-60 days to build a machine. All parts will have

to be tested qualified before shipping.

 

2.MOQ?

1 set.

 

3.Payment term?

30% deposit before we start producing.

 

4.Do you have branches overseas?

We havn't set any offices but oversea's service is available.

 

5.Do you have CE or any other certificate?

We have certificates,such as ISO, CE, The product Patent

Certificate etc.

Small Commen Sense----How to choose suitable lathe machine ?

  • How about the swing over bed?
  • What materials do you use for processing?
  • Your requirment for machine size:length,width and height?
  • What capacity do you need?
  • How long the workpiece needs to be processed?

Contact:

Web:www.lathemachinetool.com

Email:info@ayxhmt.com

Tel:+86-372-3700288

Hot Products

GSK/Funuc control system China mini benchtop cnc lathe CK0640 The Horizontal bench lathe machine ...
CK0632 mini cnc lathe with cheap price china manufacturer The Horizontal bench lathe machine CK6130 ...
Product Description The small lathe adopts the mechanical and electrical integration design, which ...
Detailed The mini cnc lathe can achieve automatic control, automatically process a variety of parts ...
Product Description The Horizontal bench lathe machine SK0632 can achieve automatic control, ...
Product Description The Horizontal bench lathe machine SK0632 can achieve automatic control, ...