Active Member
|
[China]
Address: Industry park,Pingyuan road,Hi-tech zone
Contact name:Chirlie
Anyang Xinheng Machine Tool Co.,Ltd. |
|
|
The control system uses a wide number of 980T.
The main motor adopts domestic frequency conversion motor 7.5kw
The GSK feed servo motor is used for the X / Z motor 6Nm/10Nm.
The tool holder adopts vertical four-position electric knife holder.
X / Z to the use of domestic famous precision ball screw.
Spindle bearings using domestic famous,
Chuck with manual jaw self-centering chuck
Move the tailstock manually.
Spindle hydraulic automatic four gear speed, stepless speed within the file speed.
Spindle through hole diameter 100,140 for special configuration.
Fuselage with semi-protective.
Can add chip removal machine, the additional price calculated separately.
5 meters above the lead with a screw support.
The air box can be air conditioned.
| ITEM | UNIT | CK6142A | CKP6142 | |
| CAPACITIES | Swing over bed | mm | 420 | |
| Swing over carriage | mm | 230 | ||
| Max.length of workpiece | mm | 750-1000 | ||
| Max.turning length | mm | 600-830 | ||
| Pan of guideway | mm | 350 | ||
| SPINDLE | Spindle nose | mm | A2-6 | |
| Spindle bore | mm | 66 | 52 | |
| Taper hole of spindle | 70/1:20 | MT6 | ||
| Range of spindle speeds | r/min | 0-2000 | 80-2000 | |
| No.of spindle speeds | Stepless | Manual 2 gears stepless in gears | ||
| Center height from bed | mm | 210 | ||
| Chuck | mm | 200 | ||
| FEED | Min.feed increment | mm | 0.001/0.001 | |
| Rapid speeds | mm/min | 4000/5000 | ||
| Max.travel of X | mm | 220 | ||
| Turret | Turret working position | V4 | ||
| Indexing time | s | 2.4 | ||
| indexing repeatility | mm | 0.008 | ||
| Section of tool shank | mm | 25X25 | ||
| TAILSTOCK | Dia. of tailstock quill | mm | 60 | |
| Travel of tailstock quill | mm | 100 | ||
| Taperhole of tailstock | ||||
| OTHERS | Workpiece accuracy | IT6 | ||
| Surface roughness | μm | Ra1.6 | ||
| Main power | kw | 7.5 | ||
| Lathe mass | kg | 1800 2000 | ||
| Length | mm | 2300 2550 | ||
| Width | mm | 1500 | ||
| Height | mm | 1500 | ||
The main components are: spindle box, exchange gear box, feed box, slide box, tool rack, tail frame, light bar, screw, bed foot and cooling device.
Spindle box: also called headstock, it is the main task of the main motor rotation movement coming after a series of variable speed institutions make main shaft gets the different rotating speed of the positive and negative two turn, at the same time the spindle box gives impetus to the movement into the box.
Feed box: also called feeding box, feed movement are installed in the feed box shift gear, adjust its shift gear, can get the required feeding or pitch, through light poles or screw would transmit the motion to head for cutting.
Screw and light bar: to connect the box with the slide box, and the movement and power of the feed box to the slide box, to make the slide box to get the longitudinal straight movement.
Knife rack: there are two layers of skateboard (medium, small skateboard), the saddle and the frame body together. Used to install the lathe tool and drive the lathe tool for longitudinal, transverse or oblique movement.
Tail frame: mounted on the bed guide rail and moved vertically along this guide rail to adjust its position. The tail frame is mainly used to install the top, to support the long work piece, also can install the drill bit, reamer and so on the hole processing.
about us
Anyang Xinheng Machine Tool Co. Ltd. is a professional machine tool manufacturer since 1949. Our factory covers an area of more than 30000 squares meters, equipped with our updated manufacturing facilities. We have LATHE, CNC LATHE, PIPE THREAD LATHE, SPHERE TURNING LATHE etc. We have attained ISO9001:2000 International Quality Control System Certification. Our products are sold both at home and abroad, and they are very popular around the world. Welcome to contact us !
Main products:
COUSTOMER FEEDBACK
The high performance bench lathe machine:
The lathe machine is high work efficiency,we are very satisfied.
From Adeline
General horizontal lathe machine:
To our surprise, the lathe worked very well without any problems.
Charlene from US
The sdandard type cnc lathe equipment:
The cnc machine equipment is working fine.
Santhosh Aravind from india
The high presion cnc lathe machine:
We are very pleased with this lathe machine,it woks fine with no problems.
Jose Garcia from US
1. What's your delivery time?
It usually take 15-60 days to build a machine. All parts will have
to be tested qualified before shipping.
2.MOQ?
1 set.
3.Payment term?
30% deposit before we start producing.
4.Do you have branches overseas?
We havn't set any offices but oversea's service is available.
5.Do you have CE or any other certificate?
We have certificates,such as ISO, CE, The product Patent
Certificate etc.
Web:www.lathemachinetool.com
Email:info@ayxhmt.com
