Active Member
|
[China]
Address: Industry park,Pingyuan road,Hi-tech zone
Contact name:Chirlie
Anyang Xinheng Machine Tool Co.,Ltd. |
|
|
High automatic cnc lathe cutting tool used
This series are economical and practical CNC lathe series, which are not only apply to various shapes of complex shaft, sleeve, disk parts of the internal and external surfaces, conical surface, circular surface, but also widely used in various industries such as automotive, petroleum, military and other mechanical processing.
| ITEM | UNIT | CKJ6194 | |
| CAPACITIES | Swing over bed | mm | 940 |
| Swing over carriage | mm | 650 | |
| Max.length of workpiece | mm | 4000 | |
| Max.turning length | mm | 3850 | |
| Pan of guideway | mm | 550 | |
| SPINDLE | Spindle nose | C11 | |
| Spindle bore | mm | 100 | |
| Taper hole of spindle | 1:20/120 | ||
| Range of spindle speeds | r/min | <=800 | |
| No.of spindle speeds | Manual four gear, the file Promise | ||
| Center height from bed | mm | 470 | |
| Chuck | mm | 325 | |
| FEED | Min.feed increment | mm | 0.001/0.001 |
| Rapid speeds | mm/min | 3000/6000 | |
| Max.travel | mm | 475 | |
| TURRET | Turret working position | V4 | |
| Indexing time | s | 2.4 | |
| indexing repeatility | mm | 0.008 | |
| Section of tool shank | mm | 32X32 | |
| TAILSTOCK | Dia. of tailstock quill | mm | 100/250 |
| Travel of tailstock quill | mm | 100/250 | |
| Taperhole of tailstock | Morse5 | ||
| OTHERS | Workpiece accuracy | IT6~IT7 | |
| Surface roughness | μm | Ra1.6 | |
| Main power | kw | 11 | |
| Lathe mass | kg | 10400 | |
| Length | mm | 8580 | |
| Width/Height | mm | 2010/2010 | |
| CNC System | FANUC Series 0i-mate-TD/0i-TD | ||
Knife rack: there are two layers of skateboard (medium, small skateboard), the saddle and the frame body together. Used to install the lathe tool and drive the lathe tool for longitudinal, transverse or oblique movement.
Tail frame: mounted on the bed guide rail and moved vertically along this guide rail to adjust its position. The tail frame is mainly used to install the top, to support the long work piece, also can install the drill bit, reamer and so on the hole processing.
The sdandard type cnc lathe equipment:
The cnc machine equipment is working fine.
Santhosh Aravind from india
The high precision cnc lathe machine:
We are very pleased with this lathe machine,it woks fine with no problems.
Jose Garcia from US
Anyang Xinheng Machine Tool Co. Ltd. have always been devoting to the research and manufacture of machine tools. We have LATHE, CNC LATHE, PIPE THREAD LATHE, SPHERE TURNING LATHE etc. We have the most professional research and development machines, who can meet all different requirements on technology and production. Welcome to contact us !
