Active Member
|
[China]
Address: Industry park,Pingyuan road,Hi-tech zone
Contact name:Chirlie
Anyang Xinheng Machine Tool Co.,Ltd. |
|
Main configuration:
The control system uses a wide number of funuc oi-TF (1 package).
1.5 m, 3 m X / Z motor with funuc feed servo motor 20Nm; 5 m, 6 m X / Z motor 22 / 36Nm.
The main motor adopts Funuc servo motor 22kw.
Shenyang vertical 4-station electric knife.
Electrical components Schneider.
X / Z to the use of domestic famous precision ball screw.
Spindle bearings using domestic famous products.
Other configuration:
Rail width of 755, load-bearing 6 tons, can change the weight of 8 tons.
Without semi-protection. Increase the cost of another.
Can be added chip machine. Increase the cost of another.
5 meters above the lead with a screw support.
Can be changed to the overall bedside box structure.
The air box does not have air conditioning.
| ITEM | UNIT | CK61160 | |
| CAPACITIES | Swing over bed | mm | 1640 |
| Swing over carriage | mm | 1250 | |
| Max.length of workpiece | mm | 5000 | |
| Max.turning length | mm | 4730 | |
| Pan of guideway | mm | 755 | |
| SPINDLE | Spindle nose | A2-15 | |
| Spindle bore | mm | 130 | |
| Taper hole of spindle | 1:20/140 | ||
| Range of spindle speeds | r/min | 3.15~315 | |
| No.of spindle speeds | Manual four gear, the file Promise | ||
| Center height from bed | mm | 820 | |
| Chuck | mm | 1000 | |
| FEED | Min.feed increment | mm | 0.001/0.001 |
| Rapid speeds | mm/min | 3000/6000 | |
| Max.travel | mm | 630 | |
| TURRET | Turret working position | V4 | |
| Indexing time | s | 2.6 | |
| indexing repeatility | mm | 0.01 | |
| Section of tool shank | mm | 40X40 | |
| TAILSTOCK | Dia. of tailstock quill | mm | 160/300 |
| Travel of tailstock quill | mm | 160/300 | |
| Taperhole of tailstock | Morse6 | ||
| OTHERS | Workpiece accuracy | IT6~IT7 | |
| Surface roughness | μm | Ra1.6 | |
| Main power | kw | 22 | |
| Lathe mass | kg | 13000 | |
| Length | mm | 8000 | |
| Width/Height | mm | 2600/2600 | |
| CNC System | FANUC Series 0i-mate-TD/0i-TD | ||
The main components are: spindle box, exchange gear box, feed box, slide box, tool rack, tail frame, light bar, screw, bed foot and cooling device.
The main rotating system: the main rotation system is the role of the drive device movement and power transmission to the implementation of pieces, to achieve active cutting movement.
Feed rotation system: a table, knife and so on. Feed the rotation system is the role of the servo drive device movement and power transmission to the implementation of parts, to achieve feed movement.
The basic support: including the bed, column, rail, table and so on. The purpose of the base support is to support the main parts of the machine and to keep them in a correct position in rest or movement.
Auxiliary devices: including automatic tool change device, hydraulic pneumatic system, lubrication and cooling devices.
about us
Anyang Xinheng Machine Tool Co. Ltd. is a professional machine tool manufacturer since 1949. Our factory covers an area of more than 30000 squares meters, equipped with our updated manufacturing facilities. We have LATHE, CNC LATHE, PIPE THREAD LATHE, SPHERE TURNING LATHE etc. We have attained ISO9001:2000 International Quality Control System Certification. Our products are sold both at home and abroad, and they are very popular around the world. Welcome to contact us !
Water-proof plastic film package with foam protection in each corner.
Solid Seaworthy Wood Box Package with Steel Belt.
Save space as much as possible for container loading.
The package is wooden box which is heat treatment. Or pack it according to customers special request.
Free replacing parts available in the warranty period.
Cost price replacing parts available beyond the warranty period.
Quick action and reply for the technical questions at any time in
the whole life of the machine.
Overseas after service center available in some region.
Engineer overseas service available on the requirement of
customer(relative cost born by customer).
Free design drawing, free installation, free debugging, Cheap accessories.
1. What's your delivery time?
It usually take 15-60 days to build a machine. All parts will have
to be tested qualified before shipping.
2.MOQ?
1 set.
3.Payment term?
30% deposit before we start producing.
4.Do you have branches overseas?
We havn't set any offices but oversea's service is available.
5.Do you have CE or any other certificate?
We have certificates,such as ISO, CE, The product Patent
Certificate etc.
Web:www.lathemachinetool.com
Email:info@ayxhmt.com
