Product model: GT-LS201DB
Widely used in small household electrical appliances, electronic
products, instrumentation, communications industry, LED mobile
phone, tablet computer, notebook computer, keyboard, mouse,
printer, lighting, circuit boards and other small products screw
First, the introduction of a hand-held automatic wire locking
Hand held automatic lock screw machine is mainly composed of two
1, by the feeding system will screw sorting and distribution of
screws through the distributor, the pipe will be sent to the power
of the screw.
2, by the electric or pneumatic power of the screw lock into the
lock system. With respect to a hand screw, a hand screw locking
action electric or gas group, automatic locking screw machine can
liberate a hand out, only one hand lift electric group at the screw
holes bit lock screws. When the lock end of a screw is just to
mention the electric group on the next screw hole bit lock screw,
the machine will automatically lift in the moment of a batch of
electric screw conveying to electric group, waiting for a lock
Two, screws and conditions
1, screw specifications:
The screw length should be greater than 1.2 times diameter greater
than the length of the screw nut, if, in the blowing process impact
screw lock Tsui will appear when the inner wall of the guide is
turning out first to lead the nut, screw length is not greater than
20mm, screw with pad can do activities.
2, product requirements:
No obstacle hole edge 3mm, hand-held lock screw machine lock Tsui
head and locked pay products will have the plane contact should
have enough lock head pressure lock Tsui product space.
3, nut, flat holes and counterbores requirements:
In general, semicircular cross head nut in feeding the most stable,
the level cap nut should pay attention to the thickness of not less
than 1mm, countersunk head nut (inverted triangle nut) stable
relatively in front of 2 kinds of shapes, because when a font
arrangement will overlap in the screw in locking hole should pay
attention to in the aperture is greater than the diameter of the 1.
5-2mm lock nut convenient lock Tsui head positioning, if the
proportion is not big, can be used to solve the fixture, locking
position if the plane is needed to meet the nut week there is any
obstacle or 3mm, otherwise it will cause interference.
Three, hand held automatic lock screw machine parameters
Five, why must the production line with a screw machine?
Province costs: a single person can be efficient operation,
eliminating one manual.
Efficiency: 1 minutes to lock 60 screws, the efficiency increased
by 1 times.
More relaxed: left hand without screws, can be used to help the
Cleaning: no direct contact with screws, to avoid hand contact with
the two pollution caused by rust.
Image of good: intelligent automation equipment to make the
production of a new enterprise, and set up high-tech image of
Six, our customer requirements:
1, plastic, electronics, keyboards, switches, chargers, toys,
monitors and other large and medium-sized enterprises.
2, willing to carry out the reform of production efficiency and
3, a detailed plan of the year, the boss of the strong support.
4, actively cooperate with the guidance of the correct use of
workers and effective use of.
The volume is not less than 10.
If you are determined to improve production efficiency, save labor,
please contact us immediately.