Treatment pen only 0.01mm,with good epidermis protection and immediate telangiectasia sealing

1.Principle of Treatment
Apply the 30MHz Microdot High Frequency electromagnetic oscillation, with the unique soft silk which is thinner than hairline, break the HGB into pieces in 1/100s, delivery the energy released from it to the epidermis of skin, tear down the diseased blood capillary, crush the HGB existed in blood vessel and translate it into small molecule that can be absorbed by the skin tissue easily, thus achieve permanent veins removal at one treatment, very effective. Please notice that for each treatment, do not be more than 15 minutes. Precise digital control system, perfect and brief therapy procedure, easy for learning and operation.

2. Installation
1)Keep the system steady in the clean operating room with the temperature of -10-40, humidity of less than 60%. Or it may cause irreparable damage to some components of the system.
2)Installation of Foot Switch
Keep the Switch gouges upwards, insert it to the“Foot Switch”connecter in the system, meanwhile tighten the nut screw clockwise. (Notice: keep inserting and screwing at the same time until there’s no space to move any more.)
3) Power connection
Insert the Power line to the connecter signed in the system and make sure it’s firm enough.
4). Treatment Handle
Insert one end of the treatment handle to the bottom connecter of the system, screw up clockwise, make sure it’s firm enough.
5).Power on
Make sure the alarm button is upspring, or screw the alarm button clockwise following the arrow direction until it’s upspring. Insert the power plug to the three- core power socket. Insert the key and turn it clockwise 90CW to “ON”, now it’s ready to work.

Treatment Characters:

1 .The whole treatment proceeds in the skin surface, absolute security
2 .30 million Hz uhf, 1/100 seconds duration, painless and comfortable
3.Get effect immediately, do not affect the normal life and work
4.The treat area is very small, thinner than hair.
5 .High frequency energy: 30 million Hz in 1/100 seconds. It can completely break the hemoglobin and expansive veins into the molecules and absorbed by human body
6 .Energy action time is under 1/100 seconds. This time is very short, which make sure the skin tissue won't be burned.

Operation suggestions
When operating the machine, we advise you to start the energy from around 30, because 30 is enough to treat normal spider veins. If the veins are strong, you can increase accordingly.
The energy depends on the feeling of your client, if they feel pain, you can reduce the energy.

When you do the treatment, you the needle should move fast as the videos showed. you cannot leave the needle on one area for a moment with move, or it will hurt the skin.

For bigger veins you can put the needle a little deeper in the skin, but don't pierce into the skin.
For big veins if cannot removal all of them in one treatment, you need another treatment, but don't repeat in a same area again and again, or it will hurt your skin.

Picture to show Results:

Factory

Contact Us

Beijing Nubway S&T Co.,Ltd
Website:http://www.nubway.net/
Phone: +0086-18812165502
Email:Cindy@nubway.com
Facebook:Cindy Nubway