Active Member
|
[China]
Address: Miangyang
Contact name:Michael zhang
Mianyang Prochema Commercial Co.,Ltd.&GUS Industry (Hongkong) Co,.limited |
|
|
High low temperature resistance:
-200--260°C,high temperature strength is 2 times higher than PTFE
Good adhesive and heat sealability with PTFE:
Below melting point ,it won’t stick any project.Above melting point, it has perfect adhesive property with PTFE, Metal and self-adhesion(heat sealing).
None stick to water ,oil : water contact angle: θ=115o
Electric reliability,High dielectric
60HZ-60MHZ , Under the high and low temperature,the permittivity keeps 2.1 even if the surface
damaged ,it won’t has conductive track.
Volume resistance>1018ΩM
Surface resistance>2*1013Ω
Voltaic Arc Resistance >165s No electric leakage
Weather resistance: It can be used in sunlight and ozone long
Anti-corrosion :Only in high temperature, Fluorin and alkalis can effect it,others
acid, alkali or
ester won’t effect it.
Fireproof : If firing, and will still insulate .
High diaphaneity
UL-Resistance : Good penetrability in ultraviolet radiation,and lowest refraction coefficient
Widely used in aerospace,instrumentation,medical and pharaceuticals,electronic appliances,post and telecommunications,petrochemical,metallurgical electicity,household appliances,lighting.
Characteristics:
1 The aging of the climate-resistant
2 Noncombustible
3 High oxygen idex
4 Good radiation-resistant
5 Resistant to high voltage
6 Good corrosion resistance
7 Almost do not disolve any solvents
8 The static friction coefficient is the smallest of plastic
9 A prominent non-sticky surface
Note: If you need any products of ours, please kindly contact with us
directly by following contaction . Then we can reply you faster and
easy . Thanks
Technical index of PFA:
| Item | Value | ||
| General purpose | Electric purpose | ||
| Density g/cm3 | 2.12-2.17 | 2.12-2.17 | |
| Temperature range °C | -200 -+260 | -200 -+260 | |
| Longi&tray,shrink rate % ≤ | 3.0 | 3.0 | |
| Tensile strength Mpa ≥ | 14 | 14 | |
| Elongation at break % ≤ | 175 | 175 | |
| Tear Strength (N/m) ≥ | 4.9x104 | 4.9x104 | |
| Dielectric Constanct (106Hz) | 2.15 | ||
| Dissipation Factor 106Hz ≤ | 1x10-3 | ||
| Volume resistance (Ω.m) | 1x1014 | ||
|
Dielectric Strength TH ≤ 0.05mm Th 0.05-0.1mm M/V TH ≥ 0.1mm | 100 | |
| 75 | |||
| 50 | |||
Specification
Dia ø1.5 --300mm, Thickness: 0.015mm to 0.75mm. Length :50mm to unlimited.
For UV lamp T4 T5 T8 T10 T12 , Thickness 0.2 to 0.5mm .
Color and sizes can be customiszed . Surface treated can be done (chemical or plasma treated)
Package :
Plastic bag &carton . Customized is acceptable
