PLC Smt Assembly Equipment Semiautomatic Solder Paste Pritner
Stencil Printer
C-3270 Semiautomatic Solder Paste Pritner
Features
- Adoption of Japanese high-precision motor and linear orbit can
improve steadiness of squeegee printing.
- The pressure of double-squeegee printing and the up/down motion of
squeegee can be adjusted separately with printing head and throttle
behind small air cylinder for fear of resonant vibrations.
- Total Input Power & Voltage: single-phase 220V 50/60Hz, and
total power: 100W.
- The print head can be lifted up in inclination of 45° to facilitate
installation and uninstallation of squeegee and cleaning of steel
mesh.
- The print head can be moved along and fastened to make easier
location of steel mesh and have a better printing effect.
- The mesh arms can be adjusted separately on the left and right,
suitable for the printing range of 470 - 750mm.
- The combined printing table is designed with relaining key and
positioned PIN, applicable to operation of single-sided base plate
and two-sided base plate.
- In the plate-proofreading method, adoption of mesh arm with
proofreading and adjustment of printed matter (bedplate) X, Y and Z
makes proofreading easier and simpler.
- Adoption of computerized PLC empowered with human-computer
interface brings you many options including single/double printing
and manual/auto modes.
- The squeegee seat can be adjusted fore and aft, and squeegee blade
can be adjusted in the inclination of ±15° as required in printing.
- Application of SMC pneumatic cylinder and magnetic proximity switch
can make work table move to and fro and the precision of printing
surface to ±0.01mm.
- Configuration of auto numeration and alarm frequency setup
facilitate output statistics.
- The printing dead time can be adjusted so as to meet production
demand.
Specifications
Printing Area | 300 x 400mm |
Screen Frames | 370 x 470mm, 420 x 520mm, 550 x 650mm |
PCB Size | 250 x 350mm | PCB Thickness | 0.2 - 2.0mm |
PCB Clamping | Outer or Pin |
Talbe Adjustment Ranges | ±10mm |
Printing Precision | ±0.05mm |
Repeat Positioning Precision | ±0.02mm |
IC Pitch | 0.3mm |
Air Supply | 4-6kgf/cm2 |
Power Supply | AC220V, 50/60Hz, 100W |
Dimension | L650 x W860 x H1630mm |
Weight | 280kg |
Squeegee Type | SUS316 t=0.3mm |
Squeegee Angle | ±15° |
Left/Right Squeegee Range | Maximum 530mm adjustable |
Distance between Squeegee | 55mm(30-80mm adjustable) |
Squeegee Speed | 0-9000mm/min adjustable |
Up/Down Squeegee Range | 0-40mm adjustable |
Up/down Stencil Range | 0-150mm adjustable |
Cycle Time | 5 - 20 seconds |
Control Mode | Touch Screen + PLC |
Floor Space of Printer | 1m2 |