|
[China]
Trade Verify
Address: 104-604, Building D, Jindao Industrial Park, No. 179 Huizhi Middle Road, Hi-tech Development District, Changsha, Hunan, China.
Contact name:Karl Liang
HUNAN CHARMHIGH ELECTROMECHANICAL EQUIPMENT CO., LTD. |
|
Verified Suppliers
|
|
|
Charmhigh CHM-T36VA SMT Pick And Place Machine At Low Cost For PCB Assembly
The T36VA mounter is suitable for small and medium-sized enterprises' mass production, experimental development, sample trial production and school teaching and so on. The design concept of the machine is to meet the needs of the vast number of small and medium customers, with the rapid and accurate mounting, easy operation, stable running and affordable price. It has a very high performance-price ratio and is your best choice.
Features
Collocate the stepper servo motor
High resolution ration CCD
Double mounting head working at the same time
windows system
| CHM-T36VA Specifications | |
| Dimensions | 940mm(L)×710mm(W)×340mm(H) |
| Weight | 39kg |
| Power Supply | AC220V (50Hz, single phase) /AC110V (60Hz, single phase); 300W |
| Air Supply | No external air supply required |
| Vacuum Generation | Built-in vacuum pump |
| Mounting Head Quantity | 2 |
| Mounting Speed | 6000cph(optimal without vision detection); 2500cph (optimal with vision detection) |
| Control Accuracy | 0.025mm |
| Component Type | 0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 10mm(L)×10mm(W)～345mm(L)×360mm(W) |
| PCB Conveying | Manual operation |
| Nozzle Change | Manual operation |
| Control System | External computer required (Windows) |
| Drive System | X&Y-axis driven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection; all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported |
| Transmission System | Synchronous belt+ polished rod |
| Feeding System | 29 tape feeding stacks(8mm:22,12mm:4,16mm:2,24mm:1；customization supported), 14 preset general IC stacks, worksurface custom IC trays and stick feeder supported |
| Vision System | Up-looking camara for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
Competitive Advantage:
1. Top and bottom two vision cameras, correct the position of each
components, you can view the vision image from screen for every
components.(max component size 22*22mm)
2. It has flexible PCB clamping fixture, suitable for different
size of PCB
3. It supported custom IC tray. IC tray can be fixed on machine
table.
4. wo mountina heads with 2pcs juki Nozzles. vuki nozzle inside
maanet. so it can be removed by finger, no need to disassemble with
wrench, nozzles rotation angle -180 degree to +180 degree.
5. Al-in-one machine. 29pcs feeders included in machine. no need to
buy other parts. machine is ready to work.
6. Z axis detection, machine’s pull needle automatically return to
origin to avoid nozzles broken.
7. Max height component support 5mm.
8. Closed-loop control,xy Axis with encoder, not out of step.
9.PCB calibrated by two components position, then rest components
will be calibrated automatically.
10.With vacuum detection. with automatic feeding, if one component
suck crooked, it will automatically throw it to deposit area, then
dick a new one to mount again.
11. With vision detection. camera will auto correction component
anale and place on PCB board right place. If heads not picking up
components. camera will detect it and go back to pick again. 3
times not picking. machine will alarm and stop, after supply
material. then continue working. no need to start over again.
12. Comes with convert tool (PC version). edit work file in
computer and load work file into machine by USB port. quick and
convenient.
13.Support panelized boards.
14 if you dont have PCB file. you can create a new work fle to
proaram in machine directly
15.Support single step.
16.Support cut tapesbulk material/tube material.
FAQ
1. Q: How many nozzles do you supply? Do you sell nozzles and spares?
A: The CHM-T36VA has two nozzle-heads, we supply 4 nozzles. Yes, we do sell nozzles and spares. If you need any spars, just let us know.
2. Q: Do you provide software updates?
A: Customers who buy our machines, we can offer free upgrades software for you.
