Optical Terminal Box (OTB) is mainly used for connecting the
indoor/outdoor optical cables, optical patch cords and optical
pigtails. It can be wall mounted or pole mounted, and facilitates
the test and refit of the lines.
Made of cold-rolling steel, static spreading-plastic, small
dimension and exquisite and easy for operation. The box has a
pothook, which is convenient to install and dismantle. The splice
tray could be piled one upon another, flexible to turn; the curve
radius of the coiled spear fibers should be guaranteed to be over
37.5mm in the splice tray. The box is of unique structure,
reasonable layout, and has adequate room for operation. Adjustable
clamp seal ring and reinforce configuration, which could adjust
different sizes of cables flexibly to make sure the cables are
clamp tightly. The indoor type is of excellent seal performance,
which could prevent water from entering effectively.
24 Fibers Wall Mounted Fiber Optical Terminal Box
Main technical Parameter: Environmental temperature: -25 - 55°C.
Relative humidity:≤85%((when the temperature is below 30°C)).
Atmosphere pressure:70～106Kpa. Insulating resistance:≥2×104
MΩ/500VDC. Voltage-resistance strength: Under the effect of
15kv/DC/1min, non-puncture, and no arc-over.