Asphalt Guttering Construction Wire Mesh For Concrete Walls 3m ASTM A951

asphalt guttering ASTM A951 Standard Masonry wall reinforcing Construction Wire Mesh

Construction Wire Mesh Introduction: 

Qijie Ladder Mesh conforms to ASTM A951 standard specification for masonry joint reinforcement. Qijie Ladder Mesh is continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry block walls. It is available in standard weight (9-Gauge x 9-Gauge) in mill and hot dip galvanized.Stainless steel 304/316

Masonry reinforcement mesh, Ladder Mesh Reinforcement
Block work wire mesh, block welded wire mesh, block ladder mesh

Block truss mesh

Masonry reinforcement mesh, Ladder Mesh Reinforcement

Block work wire mesh, block welded wire mesh, block ladder mesh

It is widely used in the building construction area, normally used in the wall reinforcement.

There are several kinds are available:
1. Welded after hot dipped galvanized
2. Welded after electro galvanized
3. Welded before electro galvanized
4. Welded before hot dipped galvanized

We can produce around 5000 pieces per day, with best quality zinc coating - around 400GSM for welded after hot dipped galvanized type.

Packing: Every 20 pieces per carton box, one 40 feet container can loading around 22, 000 pieces ( 1100 boxes), more photos about the products and the packing is Available.

Size details: Normally 3 meters long, the space distance is 40cm, and with different Width 5cm, 10cm, 15cm, 20cm, 25cm.

Packing:
20 pieces/carton box

MATERIAL : Iron wire & stainless steel wire 304/316
Qijie metal joint reinforcement products conform to:
ASTM A951 (Standard Specification for Steel Wire for Masonry
Joint Reinforcement)
Our products pass the testing of ASTM A951,We tested in USA .
Tensile Strength - 80,000 p.s.i. | Yield Point - 70,000 p.s.i. minimum
Zinc Coating:
Mill Galvanized coating: (0.1 oz/ft²)
Hot-Dip Galvanized after fabrication: (1.5 oz/ft²)
Wire Diameter:
9 gauge or 3/16ӯ
Side Rods and Cross Rods available in any combination of the above.
Cross Rods welded 16” O.C.
Block Size: Standard Sizes: 4” wall - 16“ wall.
Other widths available on special request.

Masonry Block Wire Ladder has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction.

Variety: Truss-Mesh Reinforcement
Ladder-Mesh Reinforcement

Available at: hot dipped galvanized, electro galvanized or stainless steel

The specification :
The widht : 50mm,100mm,150mm,200mm,250mm etc.

Construction Wire Mesh Standard Specification:

* 4” wall - 16” wall
* Other widths available on special request
* (S) Standard: 9 ga. side rods x 9 ga. cross rods
* (EH) Extra Heavy: 3/16” side rods x 9 ga. cross rods
* (SHD) Super Heavy Duty: 3/16” side rods x 3/16” cross rods

*Tensile Strength - 80,000 psi
*Yield Point - 70,000 psi