Active Member
|
[China]
Address: No.10 Building, Shuntai Square, Licheng District, Jinan City, China
Contact name:CHEN Bo
SHANDONG SMART MACHINERY CO., LTD. |
|
|
Pet Dental Care Moulding Dog Treats Injection Moulding Machine
Features
1). Moulding Machine comes with user-friendly microprocessor controller with these following features;
2). Dust, oil proof and colorful touch switch control panel.
3). El display of pressure, speed, time and distance for each motion.
4). Shut-down device with 100 presets mold data memory.
5). Equipped with 4 stages injection, 3 stages holding pressure and 3 stages back pressure.
6). PID barrel temperature control: temperature abnormal & electrical wire disconnection alarm.
7). SSR-solid state temperature controller.
8). Screw cold start protection.
9). Abnormal shot detection.
10). Output quantity and packaging quantity preset.
11). Clamping, injection and ejection (option), and carriage action (option) by linear potentiometer.
12). Screw rotating speed read-out.
13). Security code function to avoid missing data or careless changing.
14). Super low pressure clamping ensures security of user, and maintains lifespan of machine efficiently.
Introduction
Injection Moulding Machine is special machinery for producing pet snacks. With such machine, various shapes can be made, such as hedgehog, crocodile, dog, bone, pork ears, barrel, etc. The shapes are very lovely and it is a ideal encouragement to dogs and cats while they learn a new action or do well in some exercises and games. Also, we can provide different recipes to meet various market demands.
CE Certificate
CE CERTIFICATE provided, which strictly meet CE standards and EU countries import policy.
ISO 9001 CERTIFICATE provided, which strictly meet ISO 9001 standards.
Technical Parameters
| Model | SR-268 |
| Clamping force | 5680KN |
| Installed power | 89kw |
| Max mold size | 800*800 |
| Shot weight | 2500g |
| Dimension | 8.9*2.3*2.8m |
| Oil tank capacity | 1000L |
Commissioning & After-sales Service
1. We make accurate factory layout design according to customer’s factory size; if the customer needed, we could make workshop design with electricity power, water supply, gas power, material storage, final storages, worker’s restroom, etc.
2. After delivering machines to client’s factory, we start to apply for the Visa to client’s country immediately; normally the vessel needs 20-60 days to the required port, so we have enough time to get the Visa. While the machines arrives your factory, our engineers are ready to start for the commissioning service.
3. 1-2 of our engineers will go to your factory to install and adjust the processing line to realize normal production at shortest time.
4. Our engineers have responsibility to train and teach the workers how to operate, clean, maintain and repair all the machines, until the workers could well operate the processing line.
5. It normally costs 10 days for the commissioning service, and we supply 1 year guarantee from the date of completion of commissioning service.
6. The engineer’s round-trip flight tickets, accommodation and daily salary USD 100 are on client’s account.
Parameter
| Item | Name of item | Unit | DM-268 |
| Injection Unit | Screw Diameter | mm | 55 |
| Screw L/D Ratio | Ratio | 20 | |
| Injection Volume (Theoretical) | cm | 601 | |
| Injection Weight (PS) | g | 548 | |
| Injection Pressure | Mpa | 185.1 | |
| Injection Rate into Air | g/s | 223.7/276.1 | |
| Injection Stroke | mm | 256 | |
| Injection Speed | Mm/s | 95/116 | |
| Screw Speed | rpm | 201/246 | |
| Clamping Unit | Clamping Force | KN | 2600 |
| Clamping Stroke | mm | 550 | |
| Space Between Tie-bars | mm×mm | 580 x 580 | |
| Max. Mould Height | mm | 600 | |
| Min. Mould Height | mm | 250 | |
| Ejector Stroke | mm | 160 | |
| Hydraulic Ejection | KN | 68 | |
| Ejector Rob Quantity | pcs | 9 | |
| Others | Max. Pump Pressure | Mpa | 17.5 |
| Pump Motor Power | kw | 22/30 | |
| Heater Power | kw | 15.9 | |
| Hopper Volume | L | 50 | |
| Oil Pump Volume | L | 550 | |
| Machine Weight | t | 8.5 | |
| Mould Positioning Ring Diam | mm | 160 | |
| Sphere Radius | mm | SR10 | |
| Machine Dimension | m x m x m | 5.82 x 2 x 2 |
Why us?
Q: Why us Smart
Smart: With more than 10 years experience in designing and
manufacturing food machines, Darin feels proud and confident to
introduce our machines to you and your esteemed company as one of
the most competitive supplier in this business. What we strive to
do all the time is providing innovative machines for our customers.
Q: What materials Smart adopted in those machines?
Smart: All the parts that touched with Darin will use food grade
SS304, PU belt, strong carbon steel or appointed material for the
bearing parts.
High quality electronic components supplied by well-reputated
company like Siemens and WEG.
Q: How to get a proper quotation with good price?
Smart: Contact us directly and provide as more information as you
can, like the product pictures, weight, capacity, voltage and
frequency of the motor requested, delivery date if there's urgently
need. Quotation will be sent to your inbox immediately once
everything is clear.
Q: When will the machines be shipped?
Smart: Normally around 25 working days.
Q: How to visit us if you're having a business visit in China?
Smart: Our factory and office is located at Xinxu Industrial Park,
Jinan, China. Send a text message in advance and keep in touch then
we will arrange for your itinerary here according to your
requirements.
Our Clients factory feedback
A. Finished time
The production line will be finished in 25-40 days after confirmation.
B. Payment Term
30% is paid by T/T as the down payment, 70% is paid by T/T or L/C before shipment.
C. Delivery Time
When the machines are finished, we will invite you to our factory for testing machine.
then we will arrange the worker to load container promptly after all corresponding inspection issues finished.
Video:
Smart plant:
Working video:
More details and price ,please contact us :
