Active Member
|
[China]
Address: 260# West Huaian Road, Shijiazhuang, Hebei, China. 050051
Contact name:
Shijiazhuang Minerals Equipment Co. Ltd |
|
|
4 / 3E - HH High Pressure Slurry Pump For Ball mill discharge
Introduction:
HH series high head slurry pumps are end-suction, split-case, centrifugal slurry pumps provide excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost.
This series are widely used in industries, such as Ball mill discharge Rod mill discharge, Ni acid slurry, Coarse sand, Coarse tailings, Phosphate matrix, Minerals concentrate, Bottom/fly ash, Lime grinding, Oil sands, Mineral sands, Fine tailings, Phosphoric acid, Coal, Flotation, Process chemical, Pulp and paper, FGD, Wastewater
Specifications:
| Model | 4/3E-HH |
| Outlet | 3-inch |
| Quantity | 126-252m3/h |
| Head | 12-97m |
| Rated Motor Power | 120Kw |
| Speed | 600-1400r/min |
| NPSH | 2-5m |
Typical Applications:
Ball mill discharge Rod mill discharge
Ni acid slurry
Coarse sand
Coarse tailings
Phosphate matrix
Minerals concentrate
Bottom/fly ash
Lime grinding
Oil sands
Mineral sands
Fine tailings
Phosphoric acid
Coal
Flotation
Process chemical
Pulp and paper
FGD
Wastewater
Standard Material of Wet-end Parts: Hi-Chrome Alloy A05
Material Chemical Requirements, Weight%
| Description | Material Name | C | Mn | Si | Ni | Cr | Mo | Cu | P | V | S | Description | Hardness |
| A05 | Ultrachrome | 2.92 | 0.98 | 0.54 | 0.8 | 27 | ≤0.8 | ... | 0.062 | ... | 0.051 | 27% Cr Erosion Resistant White Iron | 58-62HRC |
Performance Curve:
| Type | Size | Frame | Impeller: EH3147A05 | Shaft Seal | Frame Rating(kw) | Normal Max Speed(r/min) | Max Passage Size(mm) |
| HH | 4/3 | E | 5 Closed Type Metal Vans, Diameter:508mm | Gland Packing, Expeller, Mechanical Seal | 120 | 1400 |
38 |
| SBH Series Metal Slurry Pump Specifations & Prices | ||||||||||||
| Pump Model | S×D (inch) | Allowable Max. Power (kw) | Material | Clear Water Performance | Impeller | Pricing | ||||||
| Capacity Q | Head H(m) | Speed n(r/min) | Max.Eff. η% | NPSH (m) | No. of Vanes | Vane Dia. (mm) | Weight (kg) | |||||
| Impeller | m3/h | l/s | ||||||||||
| SBH/25C | 1.5×1 | 30 | Metal (A05) | 16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 5 | 330 | 318 |
| SBH/50D | 3×2 | 60 | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 457 | 750 | ||
| SBH/75E | 4×3 | 120 | 126-252 | 35-70 | 12-97 | 600-1400 | 50 | 2-5 | 508 | 1250 | ||
| SBH/100F | 6×4 | 260 | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 720 | 2528 | ||
| SBH/100S | 6×4 | 560 | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 720 | 2880 | ||
| SBH/150S | 8×6 | 560 | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4-12 | 711 | 3200 | ||
Construction of SBH Metal Pump:
Outline Dimensions:
