Active Member
|
[China]
Address: 260# West Huaian Road, Shijiazhuang, Hebei, China. 050051
Contact name:
Shijiazhuang Minerals Equipment Co. Ltd |
|
|
Popular Vertical Submerged Cantilevered Shaft Sump Slurry Pump
Introduction:
Wetted Parts
Liners – Hard metal liners are completely interchangeable with pressure
molded elastomer. Elastomer seal rings back all liner joints.
Easily replaceable liners are bolted, not glued, to the casing for
positive attachment and east of maintenance.
Impeller – Hard metal and molded elastomer impellers are completely
interchangeable. Front and rear shrouds have pump out vanes that
reduce recirculation and seal contamination.
Throat bush – Hard metal and molded elastomer impellers are completely
interchangeable. Wear is reduced and maintenance simplified by the
use of tapered mating faces to allow positive accurate alignment
during assembly and simple removal.
Shaft seal
Expeller Seal(Centrifugal Seal) – Available with low flow water flush or zero
flow (grease lubricated) options to provide exceptional sealing
where water introduction to the seal is intolerable or limited.
Stuffing Box – Gland sealing with packing and lantern ring.
Specifications:
| Model | SV-100R |
| Capacity | 54-289m3/h |
| TDH | 5-35m |
| Rated Motor Power | 75Kw |
| Speed | 500-1200r/min |
| Max. Efficiency | 56% |
| Standard Shaft Length | 1500mm |
Materials of Construction:
| Part Description | Material |
| Casing | A05- High Chromium Alloy |
| Impeller | A05- High Chromium Alloy |
| Back Liner | A05- High Chromium Alloy |
| Shaft | Carbon Steel |
| Mounting Plate | Mild Steel |
| Strainers | Grey Iron |
Material: High Chrome Alloy A05
Material Chemical Requirements, Weight%
| Description | Material Name | C | Mn | Si | Ni | Cr | Mo | Cu | P | V | S | Description | Hardness |
| A05 | Ultrachrome | 2.92 | 0.98 | 0.54 | 0.8 | 27 | ≤0.8 | ... | 0.062 | ... | 0.051 | 27% Cr Erosion Resistant White Iron | 58-62HRC |
Performance Curve:
| Type | Size | Frame | Impeller: SV10206A05 | Shaft Seal | Frame Rating(kw) | Normal Max Speed(r/min) | Max Passage Size(mm) |
| SV | 100 | R | 5 Open Type Metal Vans, Diameter:390mm | Gland Packing, Expeller, Mechanical Seal | 75 | 1200 | 32 |
| SV SP Vertical Metal Sump Pump Specifations & Prices | ||||||||||||
| Pump Model | S×D (mm) | Allowable Max. Power (kw) | Material | Clear Water Performance | Impeller | |||||||
| Capacity Q | Head H(m) | Speed n(r/min) | Max.Eff. η% | Length Shaft (mm) | No. of Vanes | Vane Dia. (mm) | Weight (kg) | |||||
| Impeller | m3/h | l/s | ||||||||||
| SV/40P | 80×40 | 15 | Metal (A05) | 19.44-43.2 | 5.4-12 | 4.5-28.5 | 1000-2200 | 40 | 900 | 5 | 195 | 285 |
| SV/65Q | 120×65 | 30 | 23.4-111 | 6.5-30.8 | 5-29.5 | 700-1500 | 50 | 1200 | 290 | 432 | ||
| SV/100R | 175×100 | 75 | 54-289 | 15-80.3 | 5-35 | 500-1200 | 56 | 1500 | 390 | 867 | ||
| SV/150S | 240×150 | 110 | 108-479.16 | 30-133.1 | 8.5-40 | 500-1000 | 52 | 1800 | 480 | 1737 | ||
| SV/200S | 320×200 | 110 | 189-891 | 152.5-247.5 | 6.5-37 | 400-850 | 64 | 2100 | 550 | 2800 | ||
| SV/250T | 200 | 180-1080 | 50-300 | 10-35 | 400-750 | 60 | 2400 | 605 | 3700 | |||
| SV/300T | 200 | 180-1440 | 50-400 | 5-30 | 350-700 | 62.1 | 2400 | 610 | ||||
Material of Metal Lined Vertical Slurry Pump:
| No | Parts name | Materials |
| 1 | Shaft | 4140 High Tensile Steel* |
| 2 | Bearing | SKF/Timken(Standard) |
| 3 | Bearing Housing | HT250 |
| 4 | Bearing spacer | 420 Stainless Steel |
| 5 | Bearing | SKF/Timken(Standard) |
| 6 | Shim | 20# Stainless steel |
| 7 | Column | 20# Stainless steel |
| 8 | Strainer | QT500-7 |
| 9 | Back liner | 27.5% UltraChrome Alloy |
| 10 | Impeller | 27.5% UltraChrome Alloy |
| 11 | Pump casing | 27.5% UltraChrome Alloy |
| 12 | Lower strainer | QT500-7 |
| 13 | Discharge pipe | 20# Stainless steel |
| 14 | Flushing pipe | Q235 Carbon steel |
| 15 | Coupling | 45# Steel |
| 16 | Middle supporting parts | 20# Stainless steel |
Outline Dimension Of SP-100R
