Home Companies Shijiazhuang Shiza Pump Industry Co.,Ltd.

10 / 8F - G Gold Dredge Sand Gravel Pump , underwater dredge pump,Digging Sand

Active Member

Contact Us

[China]

Contact name:

Shijiazhuang Shiza Pump Industry Co.,Ltd.

10 / 8F - G Gold Dredge Sand Gravel Pump , underwater dredge pump,Digging Sand

Country/Region china
Categories EL Products

Product Details

10 / 8F - G Gold Dredge Sand Gravel Pump , underwater dredge pump,Digging Sand

 

Overview

The 10 / 8F - G series of Gold Dredge Sand and Gravel Pump are horizontal, single pump shell centrifugal slurry pumps. The pump clamp and the pump cover are clamped by special clamps. The discharge direction of the pump can be installed at any position of 360 degrees. The bearing assembly adopts a cylindrical structure, which is convenient for adjusting the gap between the impeller and the pump body. The whole assembly can be removed during maintenance, and the bearing is greased.

The G (GH) series of sand and gravel pumps are single-pump shell constructions, although there is no replaceable liner, but this also makes his over-flow passage wide and smooth. Its overcurrent components are also durable with NI-hard, high Chrome and other wear-resistant materials.

The 10 / 8F - G series of Gold Dredge Sand and Gravel Pump can continuously transport large particles of strong abrasive mud, suitable for dredger dredging, digging sand and dredging. After special treatment, theG series of sand and gravel pumps can work underwater and can adapt to more complicated work.

 

Pump Features

1. SHIZA brand G(GH) pump is horizontal single case centrifugal pump.

2. G type pump use clamp band design for pump case

3. The discharge direction can be oriented in any 8 direction at interval of 45 degrees.

4. The wet-parts of GH pump is high chromium A05 material with high hardness ,hardness is higher than  

    58 HRC, the service life is long.

5. GH pump bearing parts use cylindrical structure, easy to adjust the gap between the impeller and

    pump  body.

6. Shaft sealing for GH pump can be : packing seal, expeller seal, andmechanical seal for your

    selection

7. Type G(or GH) gravel pumps are designed for handling the most difficult high abrasive slurry which contain too big solids

    to be pumped by a common slurry pump . They are suitable for delivering slurries in mining.Explosive sludge in metal melting,

    dredging in dredger and river course .

 

Application fields

 They are widely used in the port dredging reclamation all over the our country's rivers and lakes, such

 as the Yangtze River, Yellow River, Liaohe River, Pearl River, Huaihe River, etc.

   (1) Dredge Pump, is specifically designed for low or high  head duties such as hopper dredging and

         barge river dredging use

   (2) Dredge pump is widely used for handling sugar beet liquid and other vegetable slurry

   (3) Dredge and Gravel pumps suitable for applications on slurries higher than normal temperatures.

   (4)This dredge sand pump suits for the various sub soils , long tunnel lengths that require a pump

       capable of multi staging on a high flow, high pressure;

 

Type meaning for dredge pump

10/ 8F-G(H)

10----------------pump inlet size (inch )

8----------------pump outlet size (inch)

F----------------Support Type

G----------------G gravel pump

 

G(H) gravel pump material list for parts:

Part NameMaterialSpecificationHRCApplicationOEM Code
Bowl, door, back liner & impellerMetalAB27: 23%-30% chrome white iron≥56Used for higher wear condition with pH between 5 and 12A05
AB15: 14%-18% chrome white iron≥59Used for higher wear conditionA07
AB29: 27%-29% chrome white iron43Used for lower pH condition especially for FGD. It also can be used for low-sour condition and desulfuriation installation with pH not less than 4A49
AB33: 33%-37% chrome white iron It can transport oxygenated slurry with pH not be less than 1 such as phospor-plaster, nitric acid, vil, phosphate etc.A33
Expeller & expeller ringMetalB27: 23%-30% chrome white iron≥56Used for higher wear condition with pH between 5 and 12A05
Grey iron  G01
Stuffing BoxMetalAB27: 23%-30% chrome white iron≥56Used for higher wear condition with pH between 5 and 12A05
Grey iron  G01
Door clamp plate, bearing house & baseMetalGrey iron  G01
Ductile iron  D21
ShaftMetalCarbon steel  E05
Shaft sleeve, lantern ring/resctrictor, neck ring, gland boltStainless steel4Cr13  C21
304 SS  C22
316 SS  C23
Joint rings & sealsRubberButyl  S21
EPDM rubber  S01
Nitrile  S10
Hypalon  S31
Neoprene  S44/S42
Viton  S50

 

Performance table:

Pump ModelAllowableClear Water Performance 
Max. PowerCapacity QHeadSpeedMax.Eff.Impeller. Dia. (mm)
(kw)m3/hH (m)n(r/min)(%)
6/4D-G6036-2505-52600-140058378
8/6E-G120126-5766-45800-140060378
10/8S-G560216-9368-52500-100065533
10/8F-G260216-9368-52500-100065533
10/8S-GH560180-144024-80500-95072711
12/10F-G260360-144010-60400-85065667
12/10G-G600360-144010-60400-85065667
12/10G-GH600288-280816-80350-70073950
14/12G-G600576-30248-70300-70068864
16/14G-G600720-360018-44300-500701016
16/14TU-G1200324-360026-70300-500721270
18/16G-G600720-432012-48250-500721067
18/16TU-G1200720-432012-48250-500721067

 

 

 

   

 

 

 

Hot Products

Eight Installation Positions 1 Inch Silt Soil / Solid Small Electric Slurry Pump Specifications Pump ...
High Efficiency Horizontal Slurry Pump SH 3 Inch For Dealing Mining Tailings Specification Model 4 ...
6/4 E- Sand Heavy Duty Diesel Engine Driven Centrifugal Pump For Dredging Main introduction of ...
6 Inch Heavy Duty Horizontal Centrifugal Slurry Pump By Metal Replaceable Line Main features: The ...
HH Series Abrasive Centrifugal Slurry Pump , M Series Slurry Transfer Pump Product overview The type ...
Low Density High Head Minerals Pump,Changeable Liner And Impeller 3 / 2 C - Product overview type ...