GQ105 Two Phase Tubular Dewateirng Machine / Algae Biomass Centrifuge

GQ105 Two Phase Tubular Dewateirng Machine / Algae Biomass Centrifuge
 
 
Introduction:
 
Tubular centrifuge has high performance of separate factor, high capacity, and account for small area and easy to handle,
 
it has been widely used in pharmaceutical, health food, drinks, chemical industries to separate the liquid-solid or
 
liquid-liquid-solid materials. It is an ideal centrifuge take advantage of centrifugal methods, the minimum granules
 
is 1 um, which is suitable for distill, condense and clarify the material has small gravity difference, small and few
 
solid granules and high erosion products.
 
 

Feature:

1, High speed and high separation factor

2, manual operation

3, running balance, simple operation, low oil consumption

4, Speed can be adjustable

5, High separation efficiency

6, Suitable for low capacity and price is lower

Working Principle:

 
Machine body, drive system, drum, and liquid tray, enter liquid bearing seat composed of pipe centrifuge.
 
On the top of drum is the flinch axis, under is the damp drift bearing. Main axis linked by buffer and
 
passive wheel, via conveyor belt, fasten wheel, the dynamic is transmit to drum and it will rotate axes to run at rapid speed.
 
The stuff is ripped into via liquid inlet, under the centrifuge force, the stuff along the wall of drum flow upward.
 
As different material has different density, the stuff will separate layer in the centrifuge.
 
 
 
Technical Parameters :
 
 

Structure :

Drum is composed by upper cover, regulate loop, bottom cover drive the hollow axis and pipe drum. In the drum, there install 4 wing panels, make the liquid easily reach the speed of running corner. Discharge the liquid from the two outlets on the top of the drum, and then the liquid flow into the accumulating tray and tanks.
1.Drum, main axis and flinch joint hang on the belt wheel, the wheel combined other parts composed of machine head.
The upper end of the axis support on the buffer and the drum linked by nut.
 
The beraings are used the SKF brand.