GF Virgin Coconut Oil Production Equipment Tubular Bowl Centrifuge
Tubular centrifuge has high performance of separate factor, high
capacity, and account for small area and easy to handle, it has
been widely used in pharmaceutical, health food, drinks, chemical
industries to separate the liquid-solid or liquid-liquid-solid
materials. It is an ideal centrifuge take advantage of centrifugal
methods, the minimum granules is 1 um, which is suitable for
distill, condense and clarify the material has small gravity
difference, small and few solid granules and high erosion products.
Machine body, drive system, drum, and liquid tray, enter liquid
bearing seat composed of pipe centrifuge. On the top of drum is the
flinch axis, under is the damp drift bearing. Main axis linked by
buffer and passive wheel, via conveyor belt, fasten wheel, the
dynamic is transmit to drum and it will rotate axes to run at rapid
speed. The stuff is ripped into via liquid inlet, under the
centrifuge force, the stuff along the wall of drum flow upward. As
different material has different density, the stuff will separate
layer in the centrifuge.
● Drum is composed by upper cover, regulate loop, bottom cover
drive the hollow axis and pipe drum. In the drum, there install 4
wing panels, make the liquid easily reach the speed of running
corner. Discharge the liquid from the two outlets on the top of the
drum, and then the liquid flow into the accumulating tray and
● Drum, main axis and flinch joint hang on the belt wheel, the
wheel combined other parts composed of machine head. The upper end
of the axis support on the buffer and the drum linked by nut. The
hollow axis insert in the slide bears and the bearings locked on
the machine body. The slide bearings has shock absorber, it can
float in the level.
● Only need loosen the linkage nut between drum and main axis, we
can unload the drum from the centrifuge.
● The outer cover and doors of centrifuge is the shield of drum, it
has stuff inlet. After the stuff enter the inlet it can be
delivered into drum through gush mouth and hollow axis.
● The motor install on the top of machine body, drive the belt
wheel to make the drum running. Contact stuff part material of the
centrifuge is stainless steel.
● The bearings use imported SKF brand, transducer using Japan brand
|Drum speed||16300 r／min||14000 r／min|
|Max centrifugal force||15750 R.C.F||16900|
|Drum inner diameter||φ105 mm||Φ145 mm|
|Drum effective length||730 mm||770 mm|
|Solid volume in drum||6 L||8-12L|
|Stuff inlet pressure||<0.1Mpa||<0.1Mpa|
|Output (water flux)||1500 L/H||2500 L/H|
|Motor power||3KW||3 KW|
|Specification||760×450×1680 mm||890*580*1670 mm|