Active Member
|
[China]
Address: No. 13, Qingxing Road, Industrial Concentration District, Guli Street, Jiangning Dist., Nanjing, Jiangsu, China (Mainland)
Contact name:Sunny
Nanjing FiveMen Machine CO., LTD |
|
|
Descripition:
The series separator is mainly applied in the purification and clarification of the diesel, light fuel oil, heavy fuel oil and other mineral oil, to
remove the water, moisture, mechanical impurities and some harmful substances of the oil. This model is automatic slag type, high separation
efficiency, no need to disassemble to slag. It can be automatic controlled according to requirement which greatly reduce the labor intensity of the
operating. This machine by the accurate calibration balancing, little vibration, can be long-running and operated safety and reliable.
The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully.
The machine is one kind of rotary machine with high speed, After accurate dynamic balancing, it can run for long time with low vibration, safety
and security. The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”.
The separator KYDR203CD-23 is mainly used for fuel oil (light fuel) and lubricants clarification or purification treatment,
suitable for the occasion of the ship and power plant and similar materials. for KYDR203, it's the smaller model, if you want to make test or
capacity is smaller, you can choose this types.
Our waste oil separators are used in inland rivers, offshore and ocean shipping have achieved ISO and CCS approval certificate,
Separator is mainly composed by the drive mechanism (horizontal shaft and vertical shaft), drum rack, speed measurement equipment, brakes,
motor and etc.
Note:
1. The heater can be electrical heating can also be steam heating. And the heater can be canceled when separate the light fuel oil or the oil does not require heating and the sump oil outlet can be connected into the feed-throat.
2. First, please check the appearance of the package before installation Second, open the package and check the complement of machine, spare parts and consumable parts according to contract list.
Offer area: one host , motor, a package of rotating drum (contain a separator rotating in it),1 group if special tools (see the user handbook, a group of wearing parts and spare parts (see the user handbook)
3. Hanging the separator first. When the base in position Installed balata damping pad on the each feet of the machine below, then tightening the screw. Piping connected with separator must be used hose..
4. The base of separator can be made of steel structure or pouring the concrete, both should be solid, strong and surface smoothness, and to minimize vibration and interference of the other machines.
5. To keep enough space for the maintenance when the machine is installed
6. To make the axis of the motor to be parallel to the longitudinal axis of the ship when the separator installed in the boat.
7. After the separator is already prepared, refer to chart 6, fix the drum.
Main technical parameters
| No. | Model | Capacity (l/h) | Drum diameter (mm) | Drum speed | Motor Power (KW) | Discharge way | Separator factor | Weight(kg) | Size(mm*mm*mm) |
| 1 | KYDR203SD-23 | 1500 | 230 | 6930 | 2.2 | Manual | 6170 | 245 | 850*625*985 |
| 2 | KYDH204SD-23 | 2000 | 270 | 7200 | 4 | Automatic | 6950 | 550 | 865*645*1100 |
| 3 | KYDH206SD-23 | 3000 | 315 | 6500 | 5.5 | Automatic | 7000 | 650 | 900*600*1150 |
| 4 | KYDH207SD-23 | 4000 | 385 | 6500 | 7.5 | Automatic | 7500 | 750 | 1100*1050*1250 |
| 5 | KYDH209SD-23 | 5000 | 430 | 6000 | 11 | Automatic | 8050 | 900 | 1200*950*1400 |
| 6 | KYDH470/ZYDH470 | 8000 | 470 | 5800 | 18.5 | automatic | 8500 | 1100 |
1250*1000*1550 |
| 7 | KYDH211SD-23 | 10000 | 500 | 5500 | 18.5 | automatic | 8500 | 1200 | 1250*1100*1550 |
| Item | Fuel oil | Lube oil | |||||||||||||||||
| viscosity/(mm2/s | Distillate Fuel Oil | residual fuel oil | Brand oil | purified oil | Steam turbine oil | ||||||||||||||
| 1.9~5.5 | 5.5~24 | 60 | 80 | 120 | 180 | 380 | 460 | 600 | 100~120 | 61.2~74.8 | |||||||||
| 40°C | 50°C | 40°C | 40°C | ||||||||||||||||
Density/ (kg/mm3)(20°C) | <900 | 900~991 | 880~900 | <900 | |||||||||||||||
| separation temperature/°C | 20 | 40 | 75 | 80 | 90 | 98 | 80 | 75 | |||||||||||
The ratio of actual productivity and rated capacity % | 130 | 100 | 70~75 | 60~65 | 55~60 | 45~50 | 35~40 | 25~30 | 20~25 | 50~60 | 25~30 | 80~85 | |||||||
Note: the ratio of actual productivity and rated capacity is 100% | |||||||||||||||||||
Photos
