Sealing Valves Tungsten Carbide Ball Wear Resistance And Corrosion Resistan

Chemical Stability Tungsten Carbide Ball In Strict And Harsh Working Condition
 
High-precision tungsten-cobalt carbide balls are widely used in oil drilling, deep-sea drilling pumping ball, ball seat, which is also the most critical component of the pump. Due to the harsh working environment and conditions in the oil drilling industry, it is usually contained in sand wells, heavy oil wells and high-pressure anti-sloping wells with some corrosive substances such as water, various gases, waxes, sands, etc. The oil is extracted from several hundred or even thousands of layers, which requires the valve ball and the valve seat to have good sealing, wear resistance and corrosion resistance (the valve ball and the valve seat are combined and then vacuumed to an absolute pressure of 0.36kgN). Below /cm, the absolute pressure value does not change within 10s.

The characteristics of tungsten carbide ball:

Tungsten Carbide balls are used in a variety of applications where extreme hardness and wear resistance is required. Tungsten Carbide has has emerged as a superior alternative to steel in many applications where severe conditions occur, such as high abrasion, corrosion and high temperatures.

The working process of tungsten carbide ball:

Heat treating: This high temperature process hardens the ball.

Grinding or polishing: The ball is then ground to the approximate diameter of the finished tungsten carbide balls. Thispolishing process the ball to the exact size required.

 
Specification:

Reference Illustrate:
 
Composition
The cemented carbide ball is based on a high hardness refractory metal carbide (WC, TiC) micron powder, with cobalt (Co) or nickel (Ni), molybdenum (Mo) as a binder, in a vacuum furnace or Powder metallurgy products sintered in a hydrogen reduction furnace, currently available in the series of hard alloys YG, YN, YT, YW.
Category
Carbide balls mainly include blank balls, fine grinding balls, punching balls, bearing balls, valve balls, non-magnetic balls, Monel balls, through-hole balls, measuring balls, scratching balls, and ball beads.
Grade
YG6 carbide ball. YG6x carbide ball. YG8 carbide ball. YG13 carbide ball. YG20 carbide ball. YN6 carbide ball. YN9 carbide ball. YN12 carbide ball. YT5 hard Alloy ball. YT15 carbide ball.