Active Member
|
[China]
Address: Tianyuan District, Zhuzhou City, Hunan Province, China
Contact name:Da WY
Zhuzhou Wei Ye Cemented Carbide Co., Ltd. |
|
|
Anti Corrosion Tungsten Carbide Dies Used In The Mold Industry
Erosion Resistant
Tungsten carbide punching and heading dies
-- High impact, good wear resistance
-- sizes & types are available
-- Well grounded and blanks are available
-- 100% pure raw material & direct factory produce and selling
-- Advanced equipement
-- Skilled technician
-- Many sizes & types, OEM is available
-- Trial order is welcomed
-- ISO cert
Grade and Application:
| Grade | Hardness(HRA) | TRS N/mm2 | Density g/cm3 | Application recommend |
| YG6X | 92 | 1800 | 14.9 | it can be used to make steel wire,non-ferrous metal wire or bar
material with less than 6.0mm diameter. |
| YG6 | 90.5 | 2000 | 14.9 | it can be used for steel wire,non-ferrous metal and alloy bars under 20mm diameter,and can be also used for drawing pipes with diameter of less than 10mm. |
| YG8 | 90 | 2200 | 14.7 | can be used in steel,non-ferrous metal and alloy bars and pipes,also can be used in manufactureing machinery parts,tools and vulnerable parts. |
| YG8.2 | 89 | 2000 | 14.6 | |
| YG8L | 89 | 2000 | 14.6 | |
| YG11 | 88.5 | 2300 | 14.4 | it can be used fo rhigh compression steel rod and steel pipe drawing,and the top hammer,perforation and stamping die of working under great stress. |
| YG15 | 87 | 2600 | 14 | |
| YL50 | 87 | 2600 | 14.4 | |
| YG20 | 85 | 2800 | 13.6 | it can be used for stamping die,such as punching watch
parts,stamping battery shell,tooth paste mould,small size steel ball,screw,nut,etc. |
| YG20C | 83.5 | 2800 | 13.6 | it can be used in standard parts,bearings,tools and other industries for cold forging,cold pressing mould,warhead and shell stamping dies. |
| TL40.5 | 82 | 3000 | 13.3 |
Tungsten carbide dies can be divided into four categories according to use:
1. Tungsten carbide anvil
2. Tungsten carbide drawing dies (such molds accounted for the vast
majority of tungsten carbide die.)
3. Cold heading, cold punching, forming and shaping dies
4. Non-magnetic die
5. Hot tungsten carbide die
Several issues to consider when designing tungsten carbide die
1. Selected part object. It must have a high yield, good structural
shape, quality and dimensional accuracy to meet the requirements,
blanking part thick and other characteristics.
2. Rational use of tungsten carbide. For the most likely to wear on
the parts need to analysis, if necessary, all the bottom and upper
of die should use tungsten carbide. In some cases, such as
structurally weak punch difficulty processing or fixed yet, you can
use a reasonable tool steel and cemented carbide used in
combination so that the mold manufacture and use must be the most
reasonable and economical.
3. Convex and concave mold structure. In the tungsten carbide die processing conditions allowed, tungsten carbide mosaic structure more economical, easy to process and easy repairs in the overall structure of materials and processing .
