Active Member
|
[China]
Address: Tianyuan District, Zhuzhou City, Hunan Province, China
Contact name:Da WY
Zhuzhou Wei Ye Cemented Carbide Co., Ltd. |
|
|
Silver Tone Tungsten Carbide Rod For Semi Finish Machining Of Cast Iron
Tungsten carbide rods are mostly applied for drill bits, end mills, and reamers with sub-micron grain grade YG10X, for non-ferrous precision cutting and wood cutting with grade YG6X, and for fiberglass reinforced plastics, titanium alloys, hardened steel with ultra-fine grain grade YG8X, etc.
Features of tungsten carbide rod:
As for tungsten carbide rod, below are the general features for
your reference
For more details of specific type, please inform us:
1. Better wear resistance, higher toughness, better deformation and
fracture resistance, results in a long life and good size accuracy
2. Adopt advanced automatic extrusion equipment
3. HIP sintering and precision grinding to ensure the good
performance
4. Both blank and finished tungsten carbide rods available
5. Can reach a mirror effect surface after accurate grinding and
polishing
Grade and Application:
| Grade | Hardeness ≥HRA | TRS Mpa | Density g/cm3 | Application recommend |
| YG6X | 91.5 | 1700 | 14.4-14.9 | it is useful for the finish machining of chilledcast iron,ducttle cast iron,heat-resisting alloy steel,nonferrous metal and nonmetal |
| JL05 | 91.5 | 1800 | 14.7-15.1 | it is suitable for the finishing machining of chilled cast iron,ducttle cast iron,heat-resisting alloy steel,nonferrous metal and nonmetal. It can also make for wear part with high quality requirement |
| YG10X | 90 | 2000 | 14.3-14.6 | good commonality,high hardness and toughness.it is suitablefor manufacturering various kinds of intintergral end mills,such as intergral drill,milling cutter,hote boring cutter,reamer bit and so on.it is mainly used for the finish machining of various kinds of cast iron and nonferrous metal |
| JL10 | 90.5 | 2200 | 14.2-14.5 | good commonality,with high hardness and TRS.it is used for the semi-finishing of various steel and nonferrous metal |
| JL15 | 91.5 | 2400 | 14.5-15.0 | fine particle size product,with good wear resistance and shock resistance.it is used for the semi-finishing and finishing machining of various metal and nonmetal |
| JL20 | 92.5 | 3000 | 14.7-15.1 | fine particle size product,with excellent wearresistance andshock resistance.it is also can be used for machining heat-resisted steel,stainless,nickel base,high temprature alloy |
Diameter:
type | dimension(mm) | |||
diameter(mm) | diameter tolerance(mm) | length(mm) | length tolerance(mm) | |
| Ф4*L | 4 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф4.5*L | 4.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф5*L | 5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф5.5*L | 5.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф6*L | 6 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф6.5*L | 6.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф7*L | 7 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф7.5*L | 7.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф8*L | 8 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф8.5L | 8.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф9*L | 9 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф9.5*L | 9.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф10*L | 10 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф10.5*L | 10.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф11*L | 11 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф11.5*L | 11.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф12*L | 12 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф12.5*L | 12.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф13*L | 13 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф13.5*L | 13.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф14*L | 14 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф14.5*L | 14.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф15*L | 15 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф15.5*L | 15.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф16*L | 16 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф16.5*L | 16.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф17*L | 17 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф17.5*L | 17.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф18*L | 18 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф18.5*L | 18.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф20*L | 20 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф22*L | 22 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф25*L | 25 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф30*L | 30 | +0.4~0.6 | 10~300 | 0~+3 |
