|
[China]
Trade Verify
Address: Fuli Commercial Center room 301#, Xingang West Rd.11#, Haizhu area, Guangzhou, Guangdong province, China.
Contact name:melody wong
Shijiazhuang Zhengzhong Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Glass Fused to Steel Commercial Water Tanks And Industrial Water Storage Tanks
Glass Fused to Steel Commercial Water Tanks
Center Enamel has established itself in glass fused to steel commercial water tanks and industrial water tanks for more than 30 years and promise to supply quality glass fused to steel commercial water tanks and industrial water tanks .
Our glass fused to steel commercial water tanks and industrial water tanks are made of Glass-Fused-to-Steel. Glass-fused-to-steel is the premium technology in the tank market. The enamel glass coated to the tanks forms a hard, inert barrier for both the interior and exterior tank surfaces to guard against weather and corrosion. Glass-fused-to-steel is impermeable to liquids and gas, offers excellent impact and abrasion resistance. Moreover, the color won't fade even after a lot years.
Center Enamel's glass fused to steel commercial water tanks and industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our glass fused to steel commercial water tanks and industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life.
Glass Fused to Steel Commercial Water Tanks Specifications
| Coating color | dark blue, dark green, white, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm, depends on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coatings internal and external |
| Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet, around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy yo clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance | excellent! Suitable for wastewater salt water, seawater, high sulfur crude oil, salt fox, organic and inorganic compounds |
Comparison of various kinds of tanks
| Characteristic | Stainless steel | Carbon steel | FRP | Cement | Rubber/resin | Enamel |
| Abrasion resistance | Normal | Normal | Bad | Good | Bad | Good |
| Corrosion resistance | Good | Bad | Normal | Bad | Normal | Good |
| Impact resistance | Good | Good | Normal | Good | Good | Normal |
| Insulation | Bad | Bad | Good | Good | Good | Good |
| Easy to clean | Good | Normal | Very bad | Very bad | Very bad | Good |
| Heating | Allowed | Allowed | Not allowed | Not allowed | Not allowed | Allowed |
| Anti-static Property | Bad | Bad | Good | Good | Good | Good |
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
