|
[China]
Trade Verify
Address: Fuli Commercial Center room 301#, Xingang West Rd.11#, Haizhu area, Guangzhou, Guangdong province, China.
Contact name:melody wong
Shijiazhuang Zhengzhong Technology Co., Ltd |
|
Verified Suppliers
|
|
|
200 000 gallon Glass Fused to Steel Sludge Holding Tank Accordance with AWWA D103-09
AWWA D103-09 complied glass fused to steel sludge holding tank is with superior corrosion resistant and fast in installation. Center Enamel glass fused to steel sludge holding tank is expendable and customized in color and capacity. The capacity we are capable of is minimum in 20 m3 and maximum in 20,000 m3 . Glass fused to steel sludge holding tank combines the strength and flexibility of steel and the corrosion resistance of glass. This is the combination of glass and steel to achieve the characteristics of both: superior corrosion resistant of glass, combined with flexibility and strength of steel. Center Enamel glass fused to steel sludge holding tank engineering design conform to or exceed AWWA D103-09, OSHA, and ISO/EN 28765 international standards and has more than 30 years of service life!
Specification of Glass Fused to Steel Sludge Holding Tank
| Coating color | dark blue, dark green, white, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm, depends on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coatings internal and external |
| Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet, around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy yo clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance | excellent! Suitable for wastewater salt water, seawater, high sulfur crude oil, salt fox, organic and inorganic compounds |
Advantages of Glass Fused to Steel Sludge Holding tank:
* No need crane or other large equipment during erection
* not subjected to severe weather and environment.
* superior performance in corrosion resistance and against rust
* factory fabrication tank. No painting or spray-on erection site.
* minimal maintenance cost
* can be designed to future expansion, dismantle or re-movement.
* free service for technical drawings
* turn-key service from proposal to tank commissioning.
About Center Enamel
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture, etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including the USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition.
