3.5" TFT-LCD CCTV IP Camera Tester , Optical Power Meter , TDR Test
, Digital Multimeter
The new CCTV tester is developed for the On-Site installation and
maintenance of IP camera,analog camera and network device, with
Video display, PTZ control, DC12v output power, Audio test, Color
bar generator, RS 485 Data searching and Cable testing, which are
the same to the previous models. The new developed functions
include POE power supply testing, PING testing, IP address scan,
Cable scan, Video snapshot, Digital multimeter, Optical power
meter, Video record, Image magnification, Port flicker, LED lamp
etc. The new tester also has built in TDR cable testing, which is
specialized designed for BNC cable testing in the security
monitoring system. This function can accurately measure BNC cable
and network cable’s break point and short-circuit location. The new
tester designed with easy operation and portability makes it simple
for a cctv technician or installer to install and maintain CCTV
systems, improving work efficiency by reducing time in the field.
Find out the other end of the cable in security maintenance and
CCTV system installation and maintenance
Dome camera and All in one camera testing
The CCTV transmitting channel testing
3.5 inch full-view TFT-LCD, 480(RGB)x320
low consumption, work for 11 hours
OSD menu, English, Chinese and other languages optional
LCD screen brightness/contrast/color Saturation adjustable
Automatically identify and adapt the video mode of NTSC and PAL
Enhanced colorbar generator, by receiving the video color bar to
test the video channel whether transmit normally
Moveable Micro SD(4GB micro SD included)
LED Lamp, easy to operate at night
User-defined shortcut keys(F1 and F2)
Cable scan, send the specific signal, easy to find the connected
10x zoom,video image can be magnified to view the details, easy to
Snapshot and save the current image as JPG file in the SD card
Optical power meter, used for optic fiber CCTV monitor system,
CATV system, optic fiber communication networks deployment and test
Digital multimeter, voltage, current, resistance and capacitance
can be tested, continuity testing, diode testing.
PING testing,test IP camera or other network devices’ ethernet
port whether work normally, and the IP address whether is right
IP address scan, quickly search the IP address for the connected
IP camera and other network devices
POE voltage measurement, test the POE switch’s voltage to IP
cameras, wireless AP device and other PD devices
Device Port flicker, easy to find the connected POE switch port by
sending special signals, the connected POE port will flicker at
Link monitor; check the setting IP address whether occupied
TDR break point and short – circuit measurement( BNC cable,
network cable etc)
PTZ address scan, search up the ID of PTZ camera.
Network cable and Telephone cable testing, display the sequence of
connection and the No
of the LAN cable
Multi-protocol. Supports more than thirty PTZ protocols. Such as
Support RS232/RS485/RS422, rate 600 ～ 115200bps adjustable
Lithium Ion Polymer Battery. The device employs advanced power
control and protection circuit
Display the data and image in on the screen at the same time
Easy for use that the train is almost unnecessary
1 . Video signal testing
- The new cctv tester, built-in high definition 3.5”LCD-TFT
full-view display screen, easy and directly displays the camera
- Support PAL/NTSC
- LCD screen brightness/Contrast/Color Saturation adjustable.
Suitable for field construction and maintenance work
2. Video signal level test
Test video signal strength attenuation, longer video signal cable
will cause the image to be dim, and reduce the image dynamic range,
video signal is too strong, it will cause the virtual shadow, and
reduce the sharpness of the image.
It also can real-display the video level value, if out of range,
notices will be display in the screen.
3. PTZ controller
Display the input video images. Pan/tilt the P/T unit and zoom in/
out the image. Setup the controlling parameters like protocol,
communication port, baud rate, PTZ ID, pan/tilt speed; set and call
4. Enhanced Color bar generator
Video Generating, the PAL/NTSC multi-system color bar video
generator (Eight-system switchable, transmit/receive eight-system
colorful imagines). By receiving the video color bar to test the
video channel whether transmit normally. And judge whether the
color is different, because of the transmission loss or
interference, it suitable for Video transmission of the field
tests, such as optical video transmitter and receiver, video cable
The new function color bar can test the image whether shift.
The color bar (red, green, blue, white, black) test the monitor
whether have white or black dot etc.
5. DC12V 1A output power
Power the camera with DC12V (1A) power output from the tester. It
is helpful for demo and testing when the power supply is not
6. Audio testing
Test the audio input from pickup devices. Connect the tester and
pickup device with the audio cable.
7. Cable tester
Test LAN cable or telephone cable.
Connect LAN cable or telephone cable with the CCTV tester and cable
tester. And then the connecting status, cable type and the sequence
of wires will be displayed, as well as the serial number of the
cable tester kit.
8. PTZ controller
Search the Control protocol code from Multifunction keyboard or DVR
by RS485 /RS232 interface, test the PTZ control command data
whether received anomaly and RS485/RS232 data transmission.
Screen displays 16 hexadecimal codes such as
PELCO-P:A0 00(Add) xx xxxxxx AF xx
PELCO-D:FF 01(Add)xx xxxxxxxx
9. PTZ address scanning
Search up the ID of PTZ camera. Help the engineer search the speed
dome address quickly.
10. Image magnification(10xZoom)
Set image 10x zoom, can view and display the details by
1x,2x,3x,4x,5x,6x - 10X zoom in the monitor and tester.
11. Video snapshot
Capture the video image and save the current video frames as JPEG
12. Video record
Record and save the current video in the SD card
13. Video playback
Video image and record files are saved in the SD card. Storage file
directory can be created according to the date
14. Port flicker
The tester will send special signals to make the connected POE port
flicker at special frequency, which will enable the installers to
easily and quickly find the connected ethernet cable. This function
can prevent mistakenly insertion or disconnection non-corresponding
cable to artificially interrupt network connection.
15. IP address scan
In digital IP surveillance applications, if IP camera’s IP address
is not clear or forgotten; the device cannot be used .
IP address scan can quickly search the connected IP camera or other
network device’s IP address.
16. Link monitor
To add an IP camera or other network device to the current network
group, the new IP address must not be occupied, otherwise it will
cause IP conflicts and stop the equipment normal working. Link
monitor can check if the new setting IP address is occupied.
17. PING test
PING is the most conventional network debugging tools; It is used
for testing if the connected IP camera or other network equipment’s
ethernet port is working normally and the IP address is correct.
It can test the PoE voltage when the POE switch is supplying the
POE power to IP camera. It can clearly display the power+ and
power- on the ethernet cable pins, each cable pin’s voltage and the
failure connection of cable pin series numbers.
19. LED lamp
It is useful for the Engineer to install and maintain security
system at night. LED On/Off pressing button, easy operation.
20. F1,F2 User-defined shortcut keys
The user-defined shortcut key is designed for improving the
efficiency for the engineer, anytime press, easy to operate.
21. TDR Break-point and short-circuit measurement (optional
function refer to the last page)
New function: TDR cable testing, accurately measure BNC cable,
network cable, control cable break-point and short-circuits
location. It improves working efficiency.
22. Optical Power Meter
The New tester adopts the most advanced handheld instrument
specific integrated chip , achieve ultra-low power operation, with
the 3.5 TFT-LCD High-definition screen display ,five wavelength
calibration points 1625nm,1550nm , 1490nm , 1310nm , 1300nm ,
850nm.Linear or nonlinear optical power display, it can measure the
optical power value, and also be used for Relative measurement of
optical fiber link loss. It is necessary tool for fibre-optic
communication, cable television system and security system
23. Cable scan
Send the specific signal, easy to find the connected cable.
24. Digital multimeter
CCTV Tester built in highly stable and reliable 33/4 digit (6600)
digital multimeter. It is used for the DC and AC voltage
measurement , AC and DC current measurement , Resistance
measurement, Continuity test, Diode measurements, Capacitance
measurement, Auto/Manual measuring range switching, relative
value measurement and locking . It is easy operation and
NTSC/PAL (Auto adapt)
3.5 inch digital TFT-LCD ,480(RGB)x 320 resolution
Brightness, Contrast, Saturation adjustable
1 channel BNC Input & 1 channel Output
Video Output Mode
Video Level test
Video signals measured in IRE or mV
Support RS232 and RS485
Compatible with more than 30 protocols such as PELCO-D/P, Samsung,
Panasonic, Lilin, Yaan, etc.
Video Signal Generation
Color bar generator
Output one channel PAL/NTSC color bar video signal for testing
monitor or video cable.(red, green ,blue, white and black color )
UTP Cable Test
UTP cable test
Test UTP cable connection status and display in the screen. Read
the number of the test box.
DC12V 1A power output
DC12V power output
Output DC12V1A power for camera
Search the cable by the audio signal
Audio input test
Audio input test
test the pickup and other audio equipments on the front-end
RS485 data analysis
Captures and analyzes the command data from controlling device
10 x zoom of image
Image 10x zoom
10x zoom image display and video out
Photograph,Video record, Record playback
snapshot and save the current image as JPG file
Video record and storage the file
To view the storage file in the SD card
Find the connected POE port quickly.
IP scan, Link monitor, PING test
Find out the connected IP camera or the other network equipment IP
Check the IP address whether is occupied
Test IP camera or Ethernet port of the other network equipment
whether work normally, and check the IP address
Display the power supply voltage and cable connection states
Visual fault locator
Test fiber’s bending and breakage ( SM and MM fiber)
breakpoint and short circuit measurement(BNC cable, telephone
Built-in 3.7V Lithium polymer battery ,3000mAh
After charging 3-4 hour, working time lasts 11 hours
Energy saving technology, the battery icon real-time display
English/Chinese and other languages OSD menu
194mm x 112mm x 48mm / 540g