Shenzhen Sunta Technology Co., Limited |
|
Customized Size Mobile HD DVR , Reservation Car DVR Security System
Parking Monitor Description
Parking monitoring starting voltage must be greater than 12.5V (car
batteries generally 13-14V), then the battery power, and a fifth
DIP switch to dial up sign Parking REC
This product has a power loss protection, voltage less than 11.5V
off automatically enter the sleep state, when the voltage is
restored back to normal will automatically open parking video
surveillance state.
Mobile HD DVR Technical parameters
Name | Mobile HD DVR |
Video system | PAL/NTSC(automatic identification system, attention, connect the camera before power on, The equipment support hybrid system) |
Video parameters | Resolution 720×576, 25FPS, Vp-p:1.0V, impedance: 75Ω |
Video Interface | 4 inputs (RCA connector), 1 outputs (RCA connector) |
Video Recording | TF Card (less than 64G), the video format is AV |
Audio Interface | 1 inputs and 1 outputs (Reservation function) |
Auto picture mode | Wire: High Trigger / Remote |
Mirror | OFF/ON |
Power Consumption | hosts running: 2W; power-saving mode: 1W |
Output power | 12V / 1A (camera power supply) |
Rated voltage | DC 12V/24V |
Working temperature | 0℃-+55℃ |
N.W. | 150g |
Size | 91*53*23mm (L * W * H) |
the screen mode
★Auto Mode introduces :( numbers represent the corresponding camera channel number, the channel number is not shown)
★On-off system and Manual mode introduced:
1. Short press or long press (more than 1 second) SMT button boot, showing automatic segmentation of images,again, a short press or for a long time to press the SMT button to shutdown, the system enters standby mode, but the system still in the recording.
2. long press the SMT button to boot, short press button to switch image mode.
★ Host box with high integration technology, four cameras centralized power supply box by the host, thereby greatly reducing the tedious wiring during installation, in addition to four cameras captured the image signal after the hosts converted by a video cable and the navigation DVD of "AV" port connection
Wiring Diagram Installation
<DIP switch>
★ mirror DIP switch: 4 switches, achieve about Mirror: dial-up ON, mirroring; OFF Just dial down. As default.
★ Parking DIP switch: a switch (fifth), to dial ON, system startup power loss protection, voltage is not enough, the system automatically dial down dormancy; OFF, power loss protection cancel.
To achieve parking video surveillance, proposed to ON state.
The use of video recording:
automatically turns off after five seconds into standby) by remote control Red Dot Button is on, press
ESC or Red Dot Stop recording (The default boot automatically start recording), press the "MENU"
button to enter the first page of the menu, press again to switch SETUP menu page, select
FORMAT, press the "REC or Red Dot ”,Press the left and right buttons to select EXECUTE,
press "ESC or Red Dot ” Formatting.
( 2 ) Modify the system date and time: Press the "MENU" button to enter the menu, press the switch to
the SETUP menu page, select DATE INPUT again, press "REC or Red Dot ”Key to enter the interface,
press the "left" or "right" key to switch to the SET, press "REC or Red Dot "Button to enter the date and
time by switching the left and right, press" MENU "button to confirm and switch, press" REC
or Red Dot "Button to confirm, press the" MENU "to exit.
( 3 ) Playback: Press "ESC or Red Dot "Stop video playback again, press“ Red Dot ”Key to enter the Playback
menu, press the "left" or "right" button to select the video file, press "REC or Red Dot "Button to select
the playback, press the" MENU "button to fast forward.
P.S.Blue background is selected, the yellow background is not selected.
Frequently Asked Questions
Question 1: SMD Tact switch function?
A: Long press (more than 1 second), the device starts to work,
automatic image display screen (the default screen is H), long
press again, the device enters the standby state; (Note: Press 1
second, the device starts, but Car navigation display screen
response time takes about 1 second.)
Short press (less than 1 second), single-screen and "field" screen
to cycle;
Question 2: 4 trigger lines how to wire?
A: Line 1 (Green) is a front view of the trigger wire, before the
next depending on the assist lamp or other neutral switch place;
the 2nd line (white) left, as the trigger line, then turn left
positive light; the 3rd line (yellow) to reversing trigger line,
then reversing light positive; Line 4 (blue) to the right, as the
trigger line, then turn right at lights positive
Question 3: How to connect car navigation screen?
A: The device video output line connected car navigation screen,
reverse video input port, the red line equipment output port
connected to the reversing vehicle navigation screen test line,
some car navigation screen video input is automatically detected,
so reversing the test line can be removed.
Question 4: Why is there no output device?
A: Please check whether the device POWER Power lamp blinks, and if
yes, then the device into standby mode, the output is off, press
the power switch on the remote control or press the patch trigger
switch device is turned on, POWER light long bright, video output
device.