Shijiazhuang CanChun Pump Tech Co.,Ltd |
|
Features
(1) G,GH gravel pump is cantilevered horizontal centrifugal pump designed for handling the most difficult higher abrasive slurries which contain too big solids to be pumps by a common slurry pump.
(2) Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni-hard and high chromium abrasion-resistance alloys.
(3) The discharge direction of pump can be oriented in any
direction of 360°.
(4)closed impeller with wide passage, good performance of NPSH and
abrasion resistance.
(5)All the wet/flow parts are made of wear resistant high chrome alloy material.They are suitable for delivering slurry in mining, metal melting, dredging, river dredging.
Application
G,GH gravel pump used for Delivery of slurry with strong abrasion high concentration for metallurgy, mines, coal and power plant,especially the large particles and cavitations conditions;
Especially widely used for river dredging project and river or sea water with sand transfer.
Model meaning
Ex: 6/4D-G(GH)
6: Suction diameter(inch)
4: Discharge diameter(inch)
D: Bracket form
G:Sand gravel pump
GH: High-head of gravel pump/sand pump for river dredging
Performance table
Model | Power | G(H) Gravel pump Performance Table | |||||
Flow | Head | Speed | Effi | NPSH | Max Particles | ||
(KW) | (m3/h) | (m) | n(r/min) | (%) | (m) | (mm) | |
G-6×4D | 60 | 36-250 | 3.5-51 | 600-1400 | 50 | 3.5 | 82 |
G-8×6E | 120 | 180-540 | 10-48 | 800-1400 | 50 | 4.5 | 127 |
G-10×8F | 260 | 180-820 | 13-50 | 500-1000 | 65 | 7.5 | 178 |
G-10×8S | 560 | 180-820 | 13-50 | 500-1000 | 65 | 7.5 | 178 |
G-12×10G | 600 | 360-1200 | 11-58 | 400-850 | 70 | 4.5 | 220 |
G-14×12G | 600 | 500-3000 | 6-66 | 300-700 | 68 | 4.5 | 241 |
GH-10×8S | 560 | 750-1300 | 18-80 | 500-950 | 68 | 7.5 | 180 |
GH-12×10G | 600 | 1400-2700 | 28-78 | 350-700 | 72 | 8 | 210 |
GH-16×14TU | 1200 | 700-3400 | 20-72 | 300-500 | 72 | 8 | 230 |