Sales !!! high performance ZLB vertical axial flow pump with high flow

Features

1. ZLB vertical axial flow propeller pump, clean water pump is single stage vertical axial flow pump which is suitable for transporting clean water, sewage water, rain water and corrosive liquids.

2. The transmission temperature should not be above 50 °C.

3. This vertical axial flow propeller pump, clean water pump is a high flow, low head pump, is widely applied in agricultural irrigation, water conservancy, urban water supply, drainage and sewage treatment, power plants, salt factories and farms for transporting recycled water.

4. ZLB vertical axial flow propeller pump, clean water pump can also be used in metallurgy, chemical and other industries.

5. 1Due to the motor and pump constitute an organic whole,no need to Labour,time consuming installation field,motor,drive mechanism,water pump axis of the assembly process,installation is convenient,fast.

6. 2Due to run into the water,the pump can greatly simplify the civil and structural engineering,reducing installation area,save the project cost 30~40%.

7. 3Low noise,no high temperature in the pump installation,improve the operation environment,according to requirements into underground pump station and keep the environment features of the ground.

8. 4Diving axial flow pump,motor drive pump is dry fully enclosed diving three-phase asynchronous motor,can run the water for a long time,a traditional unit series of incomparable advantages.

9. 5Using glass fiber,the high temperature resistant filter materials such as ptfe,P84,can run under the condition of high temperature above 200℃.

10.Is not sensitive to the characteristics of dust from dust and the influence of the resistant.

Construction Feature:

1.Installing mode:

Single foundation:Pump and motor are installed in the same foundation with outlet above or under foundation.

Double foundation:Pump and motor is separately installed in itself foundation with outlet between the two foundation

2.Pump shaft is made of high grade carbon steel and is supported by two rubber or plastic bearings with water as a lubricant.

3.In contact with rubber or plastic bearing is the shaft sleeve which is coated with a film of chromium in order to upgrade the anti-corrosive and anti-wearing effect.

4.The capacity and head of the pump can be changed by changing speed or adjusting vane angle according to performance table,if necessary.

5.The axial force of pump is borne by the thrust bearing of motor or the thrust bearing of pump

Model description

350ZLB-6

350 -------------------- Pump outlet diameter 350 mm

Z ----------------------- Axial flow pump

L ----------------------- Vertical

B ----------------------- Half adjust blade

6 ----------------------- Head 6m

Application

It is widely applied in agricultural irrigation, water conservancy, urban water supply, drainage and sewage treatment, power plants, salt factories and farms for transporting recycled water.It can also be used in metallurgy, chemical and other industries.

Structure

Technical data: