Active Member
|
[China]
Address: NO.116 Shijiazhuang,Hebei,China
Contact name:Joyce
Shijiazhuang CanChun Pump Tech Co.,Ltd |
|
|
Features
Installation methods: horizontal, vertical, tilting
Big floe,non-clogging, fluids flowing easily
Pump and motor share the same shaft, improving rotor concentricity, less damage to shaft when pump working
The impeller angle is adjustable, highly improve the flow adjusted range
The motor is sealed three times, ensuring that there is no water leakage
Working condition
Water temperature should be no more than 40°C
The PH value of the water from 5.5-8.5
308V three phase AC power, 50Hz
Pump must all into the water, dept of submergence not less than 0.8m
Working Conditions
Medium: raw water or light sewage water
Temperature: ≤ 50 °C
pH: 4 – 10
Volume Ratio: < 2%
Density: < 1.2 X 103kg/m3
Construction
The submersible motor is on the top of the pump. The submersible motor is of dry structure, F class insulation, reliable mechanical seal & auxiliary seal, leakage protection, inner winding, bearing temperature protection, stable & reliable performance, adjustable impeller and wide application fields.
From the suction direction looking, the impeller rotates anti-clockwise.
Installation Mode
Suspension type installation of well bore
Floor type installation of well bore
Pipe-bent type installation of well bore
Opening type installation of well bore
Concrete well bore
Technical Data
Size: 350 to 2400 mm
Capacity: 450 to 89847m3/h
Head: 1.22 to 12.05m
Application
Drain water system
Flood protection and drainage
Sewage water treatment
Water treatment in pump stations
Other industrial applications
| Product | Submersible axial flow propeller pump,dewatering pump,sewage pump |
| Model | QZ/QH/QW |
| Outlet diameter | 300,500,600,700,800,900,1000,1200,1400,1600 mm,etc. |
| Flow rate range | 0.12-12 m³/s |
| Range of lift | 2-60m |
| Voltage | 380V,660V,3KV,6KV,10KV,according to client's requirement |
| Shaft seal | It has two or three mechanical seals.The first seal, the down mechnical seal which contacts water is usually carbon silicon against carbon silicon. The upper mechnical seals are usually graphite against carbon silicon |
| Protection class | IP68 |
| Insulation class | F |
| Cable | 10m |
| Cooling type | ICWO8A41 |
| Details | *Saving the total investments >30%. *Saving the building period >40%. *Saving the install time >95% *Reduce the weight of unit > 50% *no need build Anti-flood wall and pump house *Low maintenance cost *Low noise, long life *Heat proof and leakage proof |
| Leakage protection | It has leakage protection sensor . When the motor or the wire-box is leakage, Sensor will alarming or stop working and maintain the signal. |
| Overheat Protector | The motor wiring has overheat protector. When it is overheated. Warming will be given our , motor will stop working.automatically. |
