|
[China]
Trade Verify
Address: No.70 Chezhan North Road,Changsha,Hunan,China
Contact name:James Yang ( HUAIYU YANG)
China Hunan High Broad New Material Co.Ltd |
|
Verified Suppliers
|
|
|
High potention sacrificial magnesium anode manufacturer
Hp magnesium anodes are produced in a variety of shapes and sizes for use in anti-corrosion protection of such projects are oil pipelines, gas pipelines, water supply
pipes and drain-pipes, underground cables, chemical plants,
communication, harbors, watercrafts and reservoir strobe.
Application
High Potential Magnesium anode fight corrosion effectively and
economically, and are commonly used in marine environments, soil
environment,etc..They protect a variety of steel structures in
salt, brackish and fresh water, including: Buried Oil gas
Pipelines, Storage tanks, Boats, Ballast tanks, Bulkheads, Pilings,
Heat exchangers, etc.
* Boats * Ballast tanks * Bulkheads * Water storage tanks
*Pilings * Pipelines*Heat exchangers
Magnesium anodes corrode much more easily than the materials they
are protecting, drawing the corrosion away from equipment.
Cast sacrificial magnesium anode
| Type | Al | Mn | Cu | Ni | Si | Fe | Single impurity | Total Impurity | Mg |
| M1C | 0.01 | 0.5-1.3 | 0.005 | 0.001 | 0.05 | 0.01 | 0.05 | 0.3 | Remaining |
Electrochemical properties of High Potential Magnesium Anode:
| Type | Open-circuit voltage (-V) | Close-circuit voltage (-V)Zn | Actual capacitance (A·h/kg) | Current efficiency (%) |
| M1C | 1.70-1.75 | 1.58-1.62 | ≥1100 | ≥50 |
Dimensions
Chemical componets of wrought magnesium alloy
| Grade | chemical composition | |||||||||
| Mg | AL | ZN | MN | Si | Fe | Ca | CU | Ni | Be | |
| AZ31B | Balance | 25.5-3.5 | 0.60-1.4 | 0.20-1.0 | ≤0.08 | ≤0.003 | ≤0.04 | ≤0.01 | ≤0.001 | -- |
| AZ31S | Balance | 2.0-3.6 | 0.50-1.5 | 0.15-0.40 | ≤0.10 | ≤0.005 | - | ≤0.05 | ≤0.005 | - |
| AZ61A | Balance | 5.8-7.2 | 0.40-1.5 | 0.15-0.50 | ≤0.10 | ≤0.005 | - | ≤0.05 | ≤0.005 | - |
| AZ80A | Balance | 7.8-9.2 | 0.20-0.80 | 0.12-0.50 | ≤0.10 | ≤0.005 | - | ≤0.05 | ≤0.005 | - |
| AZ91D | Balance | 8.5-9.5 | 0.45-0.90 | 0.17-0.40 | ≤0.08 | ≤0.004 | - | ≤0.025 | ≤0.001 | 0.0005-0.003 |
Company Brief Introduction:
We are a professional anode supplier over 16 years ,mainly supply:
* Zinc anodes (ASTM B418-95 US MILL 18001K)
* Al-Zn-In anodes (GAIII)
* Magnesium anodes ( ASTM-G97)
* High silicon cast iron anodes ( ASTM-A518-3,BS1591)
We can also accept customized anodes with your logo according to
your drawing !
Company Principle:
Our Belief: Continuous Innovation.
Our Spirit: Sincerity, Unity, Dedicated,
Hardworking.
Our Mission: Provide most advanced products & most professional
technical solution.
