China Hunan High Broad New Material Co.Ltd |
Verified Suppliers
|
|
Water heater magnesium anode
Water Heater,Water container,Pre-polarization of steel structure in seawater,Gas pipe,Anticorrosion of steel and iron structure where high resistant and electrolyte(soil and water) existed.
Anode Rods are available in diameters ranging from 0.500" to 2.562". Each rod has a steel core running lengthwise through its center. These anodes can be easily configured for various Cathodic Protection applications.
Water Heater Anodes are available in several configurations, with
welded or unwelded Hex-Head and Anode Outlet Devices (AODs). These
anodes are typically used for the Cathodic Protection of Water
Heaters, Tanks and Boilers. The linked-style water heater anodes
are typically for replacement applications.
Drive-in Anodes are used for the Cathodic protection of gas service
entrance piping and other specialty applications. Also available
with steel hex head caps.
Supply Ribbon Anodes are used in higher resistivity soils
where minimum resistance to earth per unit weight of anode is
important. Supply provides a uniform and efficient current
distribution along a pipeline.
For further information, or to discuss your specific requirements,
contact our sales office.
Product Introduction:
The corrosion of metal in salt or fresh water or in
soil can be prevented by the use of galvanic anodes in a cathodic
protection system.
Magnesium anodes are used in such systems, most
commonly to protect underground gas, oil and water pipelines.
When the anode's cable is attached to a pipeline or
other underground structure, a galvanic cell is created in which
electrons flow from the anode to the structure, thereby protecting
the structure.
The anode corrodes instead of the structure and must
be replaced after a certain period of time that depends on the type
of structure that is being protected, the size and grade of anodes
that are used, and the corrosivity and resistivity of the
surrounding soil.
In addition to pipelines, magnesium anodes are often
used to protect propane, water and chemical storage tanks, areas of
ships and port facilities that are not in direct contact with sea
water, power plants and irrigation systems.
Specifications:
Standard : ASTM G-97
Chemical compositions of cast magnesium anode (%) | ||||
Element | High potential | AZ63B | AZ63C | AZ63D |
Al | <0.01 | 5.30-6.70 | 5.30-6.70 | 5.0-7.0 |
Zn | --- | 2.50-3.50 | 2.50-3.50 | 2.0-4.0 |
Mn | 0.5-1.30 | 0.15-0.70 | 0.15-0.07 | 0.15-0.70 |
Si (max) | 0.05 | 0.10 | 0.30 | 0.30 |
Cu (max) | 0.02 | 0.02 | 0.05 | 0.10 |
Ni (max) | 0.001 | 0.002 | 0.003 | 0.003 |
Fe (max) | 0.03 | 0.005 | 0.005 | 0.005 |
Others each | 0.05 | --- | -- | --- |
Others total | 0.30 | 0.30 | 0.30 | 0.30 |
Mg | Balance | Balance | Balance | Balance |
Electrochemical Properties of cast magnesium anodes | ||||
Item | Open-circuit Voltage | Close-circuit Voltage | Actual capacitance | Current efficiency |
| (-V) | (-V) | (A.h/g) | (%) |
High Potential | 1.70-1.75 | 1.57-1.62 | ≥ 1.100 | ≥ 50 |
Low Potential | 1.50-1.55 | 1.45-1.50 | ≥ 1.105 | ≥ 50 |
Note: Open and Close-circuit voltage is relative to Saturated Calomel Electrode (SCE) |
Company Brief Introduction:
We are a professional anode supplier over 16 years ,mainly supply:
* Zinc anodes (ASTM B418-95 US MILL 18001K)
* Al-Zn-In anodes (GAIII)
* Magnesium anodes ( ASTM-G97)
* High silicon cast iron anodes ( ASTM-A518-3,BS1591)
Our anodes are shipped worldwide especial main
to North America, Asia etc., around 5000mt per year. Our goods are
regularly tested by independent third party lab in USA to keep
anode continuous high quality. Our plant owns raw material
resources ore, so we can supply very good price with service for
you.
We can also accept customized anodes with your
logo according to your drawing !
Office, Workshop, Inspection Lab: