Continuous oxygen free copper producing machine
Upcasting Copper Rod Manufacturing Machine produced by professional designers through indepentent design and research and
gained the reputation both at home and abroad.The induction melting furnace melt the copper cathode into liquid,
the liquid keeps off the air by charcoal or graphite flake in case
of be oxidation.
NOTE: We can produce the up cast line according to your requirments
Put copper cathode over the furnace by the lifting system for
baking→Adjust the feeding speed according to the casting speed.
Feed the copper cathode into the melting furnace for melting
(charcoal to be used for avoiding oxidization) → copper liquid
flows into the transition part (charcoal is still needed to avoid
oxidization) → Copper liquid flows into the holding furnace →
Copper liquid flows into the crystallizer to be copper rods →
copper rods enter into traction device for upward movement → Go
through the output frame →copper rods go through the distribution
frame (to separate each rod) → copper rods go through the tension
frame ( to control the take-up speed) → copper rods go through the
take-up machine,for coiling → Next process
C.The technical parameter :
|3||Furnace structure||3 body (2 melting,1 holding )|
|6||Casting rod diameter:||Ф8mm-Ф35mm|
|7||Upward casting speed||0～3000mm/min or 0-1500mm/min|
|8||Annual working time||7920hour|
|9||Liquid tracking precision||±2mm|
|10||Take-up coil standard||Ф700mm × Ф1500mm× 800mm|
|11||Copper melting velocity||260-2525kg/h|
|12||Copper melting power consumption||<350kwh/ton|
|13||Take-up form||automatic adjust|
|14||Take-up plate driven approach||inverter motor, PLC control|
|15||Material feeding method||whole piece of electrolytic copper cathode fed by electric hoist|
|16||Upward driven approach||driven by the AC servo motor, transmission chain is driven by the
gapless synchronous cog blet|
|17||Rod clamping method||air clamping or manual clamping|
D.Product Technical Standard
|Tensile Strength||over 170N/mm2|
E.Free After Service
1) Supply the design suggestion and layout plan for the clients
2) Supply the technical specification of the auxiliary facilities
for the clients.
3) Supply the equipments operation training.
4) Supply the installation,start-up and commissioning service.
Welcome to contact us !!