Zero Slip Copper Wire Machine / PLC Control 8-1.2 MM Wire Drawing Equipment

Zero Slip Copper Wire Machine / PLC Control 8-1.2 MM Wire Drawing Equipment

1. Charicteristics and advantages of 13D in-line zero slip RBD equipment (here below is called equipment)

Driven by the different variable-frequency motor, the second flow of each drawing process of the will be the same even when changing the hole type and the RPM of the drum.the hole type of the drawing mold can be changed according to the need, the RPM of each drawing drum can be set through the touch scream. So on the base of enough strength of the frame, different size of the copper rod can be drawed through the equipment since difference section reduction rate can be used on dirfferent size and diifferent material of the wore..Inported NSK or famous brand bearing wil be used.

Low slop rate and the good synchronism can reduce the lost energy into 20-30% due to the friction between the wire and the drum.

Low slip means the low brase of the drum, so the copper powder can be redused to keep the surface of the wore and other conductors.

2. technology parameter

3. blank:φ8.0mm

4. output dia:φ1.20mm

5. drawing process:13

6. drawing speed : Max speed 1800m/min

7. average reduction rate:23.6%

8. variable range for reduction rate of each proces:15%～27%

9. main paramenter for equipment

10. host machine

11. running way:13 drawing rack individual drive and frequency control

12. operating mode: PLC control,touch screen dispaly

13. type: free conbination for each drawing rack

14. drawing wheel size:φ450mm

15. No. Of drawing rack:13pcs

16. main motor: 13pcs 30kw-37kw AC frequency motor

17. structure:welding assembly

18. coling power:18.5kw AC motor

19. payy off way: longmen type

20. coiling way: elephant nose take up machine

21. cooling way:half immersed

22. plate szie(mm):Φ800 coilng plate

23. coling capacity: 800-1500KG

24. voltage:three phase AC 380V

25. Double spool plum type take up machine

26. technical parameter