Red black Colored 5D Carbon Vinyl Wrap 140gsm air release vinyl wrap

  
 Product Name: Air Release Slideable 5D Colored Carbon Fiber Vinyl Wrap Film
 
 Product Description:
  
  Carbon fiber vinyl wrap film describes the automotive aftermarket practice of completely or partially covering a vehicle's original paint with a vinyl wrap of a different color, and sometimes the same color with a differing finish like a gloss, matte, or clear protective layer.

 
Product Specfications:
 

Product Features:

• Easy apply feature helps eliminate wrinkles and bubbles during application
• Very high gloss semi-conformable film
• Unique patented adhesive technology
• Good conformability to irregular substrates
• Outstanding durability and outdoor performance
• Combines a colored film and protective layer in one convenient construction with fewer seams

 Advantages of Applying Car Wrap Film:

• Prevents damage from overheating. Provided you choose a model resistant to ultraviolet radiation or something that reflects light well, your car takes in less heat. If used on the hood, it can keep the scorching sun off of your car’s essential components.
• Professional results. Unlike many vehicular accessories, this is something even an experienced DIYer can take on. Car vinyl wraps are made to be user-friendly and intuitive, with the material responding to heat and doing a lot of the work for you. Provided you take your time during setup, it’s shocking how smooth and stylish a newly-wrapped car can be.
• Customize your car’s look. A vinyl wrap is a whole lot more affordable and much more noticeable than opting for a spoiler or a new set of rims, creating lasting, impactful changes of your vehicle’s look. You can get wraps in any color, letting you completely overhaul your car’s appearance without making any mechanical modifications.
• Safe to use on any paint. The type of adhesive that works with vinyl wraps is heat- (or pressure-) activated. It enables you to slide it into position during installation. The glue is gentle on your car’s surface, even after it dries. Vinyl wraps are easy to remove and won’t harm your car’s paint. They are, however, single-use items. Once removed, you can’t reapply it
• Useful on exterior and interior. When you think of car vinyl wrap, you might think of a complete exterior overhaul. But vinyl has applications inside your car as well. If you cut it to size and pick a suitable color, it can really jazz up your dashboard, accent your radio, or make your doors more stylish. Yes, vinyl wraps are functional, but they also lend themselves to artistic applications.

 FAQs:
  

• Can I put my wrapped car through a car wash?

Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.
 

• Will car wrap damage my car’s paint?

Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.
 

• How long does vinyl wrap last?

Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care after installation, and environmental factors, car wraps can last from three to ten years.
 

• How Do You Maintain a Wrapped Car?

The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.
 

• HOW TO REMOVE VINYL FROM YOUR CAR

1. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.
3.Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.