Fiberglass Hydraulic Oil Filter Element Replacement Internormen 320911

Filterk 320911 Micro-Fiberglass Filter Elements 3µm Micron replacement Internorman

Replacement hydraulic filter elements. These elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination.

Features:

Microglass

a. Deep filtration

b. Absolute Filtration

c. High particle holding capacity

d. Best micron rating at high Δp

e. Usable for mineral oils, emulsions and for most synthetic hydraulic fluids and lubrication oils

Paper

a. Deep Filtration

b. Nominal Filtration

c. Constructed of paper and polyester fiber

d. High material stability and strength

Stainless steel wire mesh

a. Surface Filtration

b. Nominal Filtration

c. Provides high resistance filter elements (irrespective of the hydraulic fluid used)

d. Partially cleanable

e. Available in 25 μm, 40 μm and 80 μm, other micron ratings on request

Applications

• Turbine lube & hydraulic oils
• Compressor lube oil
• Water glycols
• Synthetic lubricants
• Petroleum based fluids
• Cost-effective replacement for Expensive OEM elements

Technical Details:

• Absolute filtration typically ßx(c) ≥ 1000
• High ßx value stability across a wide range of differential pressures
• High contamination retention capacity
• Disposable elements and cleanable elements
• Elements pleated
• Flow direction from out to in to maximize stability
• Excellent flow fatigue stability due to solid filter material support
• Standard filtration ratings: 3μm, 5μm, 10μm, and 20μm absolute