AAF Noil Inlet / Outlet Large 20 Micron Filter Cartridge , Any Size Pleated Media Filter

This replacement element for your oil mist eliminator is manufactured with a seamless housing and no welds to rust or vibrate apart.
This element can be easily replaced with a thumbscrew.
Recommended Change: 4-6 Months (depending on usage and environment conditions)
 
Air oil separator filter is the key to the quality of compressed air in air compressor. The compressed air from the compressor head noses carries oil droplets of various sizes,the big oil droplets are easy to be separated by the separation tank,and the small ones(suspension) must be filtered through micron fiberglass media of air oil separator filter.
To chose the correct diameter and thickness of fiberglass is one of the most important factors to ensure the filtration effect.
The small oil droplets quickly aggregate into large ones after the intercept, spread and aggregate of filter media,then settlement in the bottom of the filter via the influence of pneumatic and gravity. The oil returns to the lubrication system continuously from the return pipe inlet at the bottom recess of filter element,allowing the compressor discharging purer,higher quality compressed air.
 

Advantages of Oil Mist Separator:

• Easy Installation
• High Efficiency
• Noise Reduction
• Long Life
• Full Range

A large range of applications:
Oil mist separators can be used in any application where extreme high efficiency is required, and are especially
useful for dealing with the following conditions:

• Applications where heavy, dry smoke is generated along with the mist.
• Applications that produce very fine mist particles which may sometimes bypass the impaction process, (jobs that run at very high spindle speeds,high-pressure coolant, etc.).

Great for:

• CNC Lathes
• Machining Centers
• Grinders
• Swiss-Style CNC’s
• Screw Machines
• EDM Machines
• Manual Lathes
• Milling Machines
• Injection Molding Machines
• Rotary Transfer Machines
• Gear Hobbers
• Cold Heading Machines
• Aqueous Parts Washers
• Vacuum Pumps
• Printing Presses
• Baking Lines
• Some Heat Treating Processes

FAQ:

1. Q:Are you a factory or trading company?

A:We are a factory

2. Q:Where is your factory located? How can I visit there?

A:Our factory is located in Zhangjiagang City, Jiangsu Province, China, about 1.5 hours from Shanghai and

40 minutes from Wuxi Dong station by car. All our clients, from home or abroad, are warmly welcome to visit us!

3. Q:How can I get some samples?

A: We are honored to offer you samples.

4. Q:How does your factory do regarding quality control?

A:Quality is priority. Filterk people always attach great importance to quality controlling from the very beginning

to the very end. Our factory has gained ISO9001:2008 authentication.

We are your best choice!