Amazon Boxes Zipper Shipping Boxes Machine / Minimum Paper
Size250mm×250mm / Power 18 KW (380V AC 3φ 50Hz)
Instruction:
Semi-automatic press model folder&gluer speicail to meet middle
and small orders, small CBM, easy operation, widely use range, it
is suit for normal box, special shape color box. Add automatic
gluing device also can produce hook bottom box and earth cover
carton, save glue, labour, maxmium run speed 60m/min, the effective
is 3-4times than normal mahcine; gluing firmly, trimly and don't
over glue,with double head sander remove UV or film. Improve
adhensive.
Advantages:
This machine can be added with a shell, which is not only
beautiful, but also has a protective effect.As shown below
.
E-commerce special zipper carton third generation glue process
Compared with the first generation of double-sided glue, the second
generation of foam glue two adhesive materials, the third
generation of technology advantages are very obvious.
1,10000 meters long endurance, production efficiency increased by
35%.
2, hot melt adhesive material cost is 40% of double-sided adhesive.
3, environmental protection degradation (double-sided adhesive can
not be completely degraded).
Product parameters:
Model | HM1300 | Working width | 1310MM |
material | ≥300g/m²cartons | Air compressor | min. 6 bar |
Minimum paper size | 250mm×250mm | total power | 18 KW (380V AC 3φ 50Hz) |
Maximum paper size | 1300mm×1050mm | weight | 1600KG |
The highest speed | 60m/min-100m/min | Machine dimensions | 6600*2100*1600 |
Feature
1.The machine is running steady with strengthened driving system,
and it is also easy for maintenance.
2.The motor is controlled by a transducer (inventer) which is
available for automatic timing. It is power saved and helps to work
stably.
3.An electric adjusting system in the machine makes it more
conveniently when adjusting the space of carriers which usually
based on the double-face tooth rods adjusting system.
4.Feeder is controlled by a separated motor. Paper is usually feed
by several thick belts under the help of vibration motor. Feeding
is continuous,exact and automatic with this system.
5.Grinders are provided in both sides of machine, to make gluing
more stable and firm.
6.Two sets of gluing units: top unit for bottom glue and lower unit
for the side glue. All standard glue units apply line glue. Space
adjustment is through the tooth rods.
7.PLC system and touch screen for easy operation. Out-put
quantity/speed/counting etc., is able to set by this system. A
remote diagnosis helps to maintenance (remote controller system
included), and a photo electric system for speed control in
pressing unit (speed in pressing unit is corresponding
automatically with the one in feeding unit). Counting through
photo-electric sensor & electromagnet kicking.
After-sales service:
1. The initial installation training includes written process
training and on-site training until you can operate the machine
independently and safely. The general training is 3-5 days before
you can proficiently operate the machine independently. After the
training, you can contact our after-sales staff by telephone or
video at any time.
2. The quality warranty period shall be within 12 months from the
date of completion of installation and debugging. During the
warranty period, Party B shall repair and replace relevant parts
free of charge if there are any quality problems of the product. If
the subject matter is damaged and parts need to be replaced due to
party A's factory reasons or improper operation, Party B shall only
charge the cost of the replacement parts during maintenance and
provide lifelong service.
3. After receiving the warranty notice, if the problem cannot
be solved by phone or wechat video, the maintenance personnel must
arrive at the site for service within 24 hours.
4. If our staff comes to your company's urban area (new machines
are installed within 2 months in the Yangtze River Delta area), we
will visit your company's workshop irregularly to provide services,
record every problem reported by users, continuously improve
products, and create maximum value for users.