Active Member
|
[China]
Address: Room 104,Building 3,Poly Yue Mansion, Yingbin Road, Jiyang District,Sanya City, Hainan Province,China
Contact name:christin zhu
Hainan Bojun Trading Co., Ltd. |
|
|
SYKM1400*2400 Chain Feeder Four Color Printer Slotter Die Cutter Machine
| Model | SYKM1400x2400 |
| Max. speed | 60pieces/min |
| Economic working speed | 50 pieces/min |
| Minimum sheet feeding size (mm) | 650*750 |
| Maximum sheet size for continuous feeding(mm): | 1400*2400 |
| Maximum printing area (mm): | 1400*2200 |
| Wall to wall distance(mm): | 2600 |
| Range of printing plate thickness(mm): | 6 |
| Sheet thickness range(mm): | 2-11 |
| Slotting accuracy(mm): | ±1.5 |
| Machine body thickness | 40 mm |
| Machine main motor power (KW) | 5.5 |
| Motor voltage | 440 |
| Diameter of printer roller(mm) | 468 |
| Diameter of anilox roller(mm) | 169 |
| Diameter of rubber roller(mm) | 174 |
| Diameter of die cutter roller(up)(mm) | 434 |
| Diameter of die cutter roller(down)(mm) | 432 |
1. Main technology parameter:
2. Machine introduction:
Printing part:
The printing roller
The printing roller is steel material, after balance correction.
The surface of the printing roller is grinded, polished and hard chromium plating.
The down press printing roller.
The down press printing roller adopts seamless steel tube, after balance correction.
The surface of the down press printing roller is grinded, polished and hard chromium plating.
The anilox roller
The steel anilox roller surface adopts advanced chromium plating. Smoothness and hard wearing.
The Pneumatic control Up-down device of the anilox roller is synchronous with the cardboard feeding system. (when the cardboard is fed, the anilox roller is going down and touch the printing plate, when cardboard feeding is stop, the anilox roller will go up and separated from the printing plate.)
The rubber roller
The rubber roller is steel roller covered with hardwearing rubber, this roller is especially grinded, and after balance correction. The surface’s diameter in middle part of rubber roller
is bigger than two sides, so as to obtain good effect of ink transmission.
Inking system.
Inking system adopts pneumatic diaphragm pump inking with the ink cup to prevent the ink splashing. Steady inking and easy to maintain.
Have ink dust filter, make the ink more clearer, and improve the printing effect.
When the machine stopped, the anilox roller and rubber roller could running independently for transmission ink and prevent the ink drying out.
Slotting part:
Creasing wheel roller material is steel tube.
The surface of the creasing wheel roller is grinded, polished and hard chromium plating. And after balance corrective.
The slotting knife roller is after two times grinded. Be polished and hard chromium plating. And after balance corrective.
The width of the slot is 7mm.
The slotting knife is saw-tooth, adopt alloy steel material and after heat treatment and grinded, more hardwearing and sharp-edged.
The slotting knife and creasing wheel are synchronous move left and right, adjust by manual, with button control.
The four slotting knives are synchronous moving for adjusting the height of the carton box, adjusted by manual, controlled by button.
The distance between the up and down slotting knife roller is adjusted by hand wheel, while the dial shows the adjust date, the adjusting scope is 2-12mm.The up and down slotting knife plate roller adopt the crosshead connect with the drive gears, when adjust the distance between the two rollers, the distance between the two driver gears of the two rollers will not be changed.
The clockwise and anticlockwise phase adjustment of the slotting unit
Adopt satellite gear structure for adjust the clockwise and the anticlockwise phase of the slotting knife plate.
Die-cutting part:
The rubber anvil roller.
The rubber anvil roller is steel material; the surface is grinded and hard chromium plating after balance correction.
Adopting mechanical control, the position moves left and right of the rubber roller. The movement distance is 40mm. This structure makes the rubber covers equally wear, which can increase the use time.
The automatic Pneumatic control Up-down device of the rubber roller is synchronous with the cardboard feeding system. (when the cardboard is fed, the rubber roller is go down and cut the cardboard, when cardboard feeding is stop, the rubber roller will go up and separated from the die.)
There is a rubber repair device with the machine, the rubber can be used again after be repaired.
The die roller.
The die roller is steel material; the surface is grinded and hard chromium plating. After balance correction.
The phase adjustment of the die-cutting unit
Adopt satellite gear structure for adjust the clockwise and the anticlockwise phase of the die roller.
Add the slotting attachment device on the die roller, which can finish the slotting work, will save machine cost and template cost in using in future.
Stacking Unit:
- Star Reel Stand
Manual and automatic modes are optional.
The star reel stand drives the belts moved, which the tension can be adjusted individually without the restriction of the length of the belts.
The speed of paper stacking can be adjusted at random within a certain scope.
