Intelligent Sensing Car Security System Light And Rain Sensor Module , 20A Relay Current

Universal Car Security System Light and Rain Sensor Module for Car

Technology Parameters

Supply voltage : 10v-16v

Operating current:<200mA

Operating temperature:-20-85°C

Relay Current: 20A

Detection sensitivity:0.005 milliliters (water)

Wiper response time:0.1 second

Installation 

1. Stick the film, after the sticker film fixed on the windscreen, then stick the sensor module on the film.(The steps on how to stick the film, see the manual.)

2. To stick the sensor module on the film, firstly remove the sticker covering from the sensor module. preferable to stick from the bottom up, and the sensor panel must level the transparent window which in the middle of the sticker flim. And then check and make sure there is no bobble in between the sensor module and the sticker film.

3. Remove the sticker covering of the back plate, level with the film and sesor module, and then stick it on the film.

4. Cut the cover plate of the wire chase according the length of the back plate

5. Cut the back plate of the wire chase according to the length of the sticker film.

6. Cover the sensor module, plug in the wire, and cover the cover plate of the wire chase.

Features

1. Rain sensor will activate the wiper when rain. According to the amount of raindrop, it will adjust the wiper speed automatically as intermittent/slow/fast.

2. The switch of the rain sensor will take the place of the orginal intermittent controller, and the slow and fast speed mode function is still reserved.

3. Light sensor will be activated at dusk or the car gets into the poor light spots like tunnel and garage, the system will activate the motormeter light and dipped headlight.

4. The Light sensor switch is jointed with the original headlight switch, When you start the car, you can cancel the automatic headlight mode by light control handle, so you will be able to operate the headligh manually. If you restart the car, the automatic headlight mode will be activated again.

5. In order to reserve the power to start the engine, the sensor systme will delay turning on the headlight by 5 seconds when starting the engine at night.

6. In order to illuminated your way to home, the sensor system will delay turning off the headlight by 30 seconds when turning off the car at night (wire connection optional)

Full accessories:

Rain and Light sensor module

wire chase

Rian and Light sensor controller module

Wires

Warranty

1. 18 months warranty time.

2. Replace new product against manufacturing defect

3. Repair if caused problems by customer