Home Companies Anhui Ans Auto Technology Co., Ltd.

14411-62700 Car Turbo Charger , TD42T Diesel Turbo Charger Safari Y61 4.2L

Anhui Ans Auto Technology Co., Ltd.
Active Member

Contact Us

[China] country

Address: Room B018,Nanxiang Wanshang Marketing Center,Wuhu city, Anhui province,China

Contact name:Amanda Cao

Inquir Now

Anhui Ans Auto Technology Co., Ltd.

14411-62700 Car Turbo Charger , TD42T Diesel Turbo Charger Safari Y61 4.2L

Country/Region china
City & Province wuhu anhui
Categories Generator Parts & Accessories
InquireNow

Product Details

Ans Auto Turbocharger System Nissan Patrol / Safari Y61 4.2L TD42T/TD42TI (Less Exhaust)


 

Car Engine Turbocharger Adavantage:

 

1. Function:

Upgrade your factory turbo on your Nissan Patrol GU 4.2Ltr with a Ans-auto Turbo andexhaust system
Our most popular turbo system and why not with a larger turbocharger for your NissanPatrol TD42T or TD42TI you'll Receive 20-25% more power!
The factory turbo on the Nissan TD42T and TD42TI engine is too small to efficiently flowthe exhaust gases, resulting in back pressure build up in the exhaust manifold.
Consequently the factory turbo is unable to deliver optimal power & torque at top end.The brand of turbocharger used in this turbo system is a Borg Warner (previouslySchwitzer) turbocharger which has been specifically matched to the engine it is beingbolted on to.
The ANS-AUTO Upgrade turbo delivers up to 20-25% more power over the factory turbo, asit is physically larger and therefore able to effectively flow the exhaust gases efficientlywithout losing power at low revs.

 

 

2. Effect:

- Schwitzer S2A turbocharger (311301-42)
- Air outlet piping (connect to either crossover pipe or to factory intercooler)- Dump pipe TOM458
Note:Our aftermarket turbo system to suit the Nissan Patrol 4.2ltr upgrade kit has beendesigned with 2 1/2 or 3 " mandrel bent exhaust and perform best when purchased withthe upgraded exhaust, we provide a no exhaust option for those who have alreadyupgraded their exhaust system.

 

3. Instal:

1. Remove complete exhaust system, original turbo and small turbo heat
shield and Turbine Bracket.
2. Remove oil in pipe and drill out hole in 2 bolt plate to 9/64 or 3.5mm to
allow more oil to turbo then thoroughly clean, and reassemble.Oil inplate may have to be ground to fit past turbo mounting bolt.
3. Leave original turbo hose in place.
4. Remove cast air in pipe from original turbo and bolt to front of upgradeturbo.
5. Bolt on new turbo and connect oil inlet and outlet.
6. Fit 90° elbow to dump pipe, then engine pipe, muffler, 56° elbow,
Station Wagon 45° for cab chassis and finally tail pipe using
appropriate hangers and clamps.
7. Reconnect air cleaner pipe to turbo air in pipe.Replace original
breather hose with hose supplied
8. Connect to intercooler pipe using long 90° 2 inch aluminium casting
and turbo hose and clamps supplied.
9. Unlock primary fuel locknut on top of fuel pump and using 4mm Allenkey, move the screw clockwise half a turn.
10. Fit test boost gauge and pyrometer, check oil and water.
11. Start engine and allow it to idle for 5 minutes whilst checking for oil andair leaks.
12. Road or dyno test and adjust boost to 15 PSl maximum, at turbo (do
not exceed) and maximum pyrometer reading should not exceed 550°.

 

 

 

 


Car Engine Turbocharger Details:

 

Name:Turbocharger
Part No.:14411-62700
Size:Different model for different car/Suitable for original car
Origin:China
appliation:PATROLTCA
Payment term:T/T 30% deposit in advance and 70% balance before shipping

 

 


 

Car Engine Turbocharger Discription: 

 

 


 

Car Engine Turbocharger FAQ

 

Q1. What is your terms of packing?
A: Generally, we pack our goods in Bubble Inside and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB.
Q4. How about your delivery time?
A: Generally, it will take 20 to 40 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.

 


 

Hot Products

2014-2017 Land Rover Range Rover Sport changed to SVR surround Automotive Body Kits Adavantage: 1. ...
Suitable for Toyota Camry modified Lexus large surround front and rear bumper mid-net Camry surround ...
Modified body bracket assembly 2014-2021 Masa Geberit Ghibli upgrade GTS old and new Automotive Body ...
Volkswagen Golf 7th Generation Modification Upgrade 7.5R Large Surround Front Bar Side Skirt Rear ...
Suitable for Mercedes-Benz W223 to MAYBACH large enclosure front bumper assembly rear bumper ...
Chery Clutch Kits Clutch Cover Bearing For All Chery Engines Original Chery Spare Parts Adavantage: ...