Active Member
|
[China]
Address: Fuhai Industry Development Zone, cixi city, Zhejiang, China
Contact name:Joyce
NingBo Hongmin Electrical Appliance Co.,Ltd |
|
|
HDPE blow moulding floor standing water dispenser hot and cold YLRS-D2 with full stainless steel water piping
Company Brief Introduction
Our company is a professional manufacturer of water dispenser, water purifier & parts. Our company integrates with designing, production and trading. With the principle of high start point, high standards, and supper quality, the company has sold its product and been well-known in domestic and oversea market.
Precautions
1. Use drinking water only.
2. Keep the condenser free from dirt and dust.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
5. Children should be supervised to ensure that they do not play with the appliance.
6. Do not make any changes or damage to the cooling system. Any changes or maintenance to the cooling system should be done by qualified organization.
6. Do not tilt the dispenser more than 45 degrees or you may damage the compressor.
7. The unit is equipped with a grounded plug. Do not alter or change the plug in any way.
8. Never turn on heating switch when there is no water.
9. Hot water is hot enough to cause injuries. Please keep your children away from the hot water faucet.
10. Please turn off the power switch when stopping using it..
11. For dispenser with refrigerator, please do not open the refrigerator too frequently or leave the door open. Otherwise, the water may freeze. Once water freezes, turn off the cooling switch and re-run the unit in one hour.
Parameter table
| Model | YLRS-D2 | |
| Product Feature | Hot&Cold, Floor standing water dispenser, without cabinet, cold water by compressor cooling | |
| Product Specifications | SS 304 for hot water tank; Water pipe connection:full SS tubes except for steam drainage tube, with non-spill water guard system | |
| Power Supply | AC 220-240V~50/60Hz, | |
| Power Consumption | Cold | 90W |
| Hot | 550W or 500W | |
| Cold | Cooling system | Compressor cooling |
| Tank type | SS tank, 3.5L | |
| Temp range | 6-10℃ | |
| Cooling capacity | 2.0L/h | |
| Hot | Heater type | Inner heater |
| Tank type | SS tank, 2L | |
| Temp range | 85-95℃ | |
| Temp control | Bimetal thermostat | |
| Heating capacity | 5.0L/h | |
| HS CODE | 8516791000 | |
| Packing method | 5-layer carton Box | |
| Colors available | full white | |
| Product weight | 13.0kg | |
| Product boxed weight | 14.0kg | |
| Product dimensions | 29*28*98cm | |
| Product boxed dimensions | 31*30*101cm | |
| Loading quantity | 40HQ | 550PCS |
| Lead time for MOQ | 35 days | |
Competitive advantages of our products.
1. Beautiful shape, luxurious and elegant appearance.
2. Low noise, power saving, long life, safety and hygiene and so on.
3. Works at high thermal efficiency.
4. This product is capable of serving hot & cold water all day long, which could be used for tea, instant coffee and other needs for families.
5. It can be used in a variety of public places. home and office use compressor cooling stainless tank standing water dispenser
6. The stainless steel series products are hygienic and durable.
Packing and Transportation
1. We usually ship the goods by sea in full container of 20ft or 40HQ which is considerate for the safety.
2. Our goods are all in cartons with foam protection
3. For sample shipment, we will add the wooden case in case of breakage
Our Sample policy
We will charge the sample if you want to get a sample and check the quality before you place an official order.
And the freight by Fedex or DHL is on your side. We promise to minus the sample cost from the amount of your
official order in the near future. Thanks for your understanding.
Non-spill water guard
How to Contact us
