|
[China]
Trade Verify
Address: NO. 96 Jinghai Middle Road, Shatou Community, ChangAn Town, Dongguan City, GuangDong Province, China.
Contact name:Sam Pang
ERBIWA Mould Industrial Co., Ltd |
|
Verified Suppliers
|
|
|
Auto Rubber Injection Mold For Car Interior Trim Center Console
Double Cup Holder Pad Mat
ERBIWA MOULD INDUSTRIAL Co., Ltd is one of famous Automotive OEM
interior trim part mould manufacturers in China, which is ISO9001
and TS16949 certified mould making company. Automotive interior
trim parts mould including cup holder mould, instrument panel moulds, door trim mould, etc.
Part One: Detailed Information
| Automotive Interior Trim Center Console Double Cup Holder Pad Mat | |
| Mold Name | China brand molds |
| Mould Shaping | China customized injection mould |
| De-mould Type | Automatic Eject |
| Mould Base | LKM & Hasco & DME, etc |
| Mould Material | NAK80, S136, 2316, 2738, H13, 5CrNiMo, 718H, P20, 40Cr, 60#, 45# etc |
| Mould Cavity | Single or multi, as your requirement |
| Sprue Gate | YUDO runner, Hot runner, Cold runner, Pin-point gate, Submarine gate, etc |
| Design software | UG, PROE, CAD, CAXA, etc. |
| Plastic material | PP, PC, PS, PA6, POM, PE, PU, PVC, ABS, PMMA, etc |
| Mould Life | 100000~+1,000,000 shots |
| Delivery Time | 35-55 working days |
| Payment Terms | T/T |
| Packaging | Wooden cases with steel frame, or as your requirements |
| Transportation | By Sea or by air, or as your requirements |
| Export Country | Worldwide |
| Specification | As your requirement |
| OEM Order | Welcome |
Part Two: Design Analysis Of Cups Holder Moulds
(1) Cup holder mould parting surface
Is separated from the mold parting surface, the surface of our
products. Injection mold has a parting surface and multiple moulds
parting surface. According to the characteristics of the related
parts, select parts of the big end is part of low surface as the
parting surface, in this way, easy to remove when open mold parts.
(2) Cup holder mould cavity number and its arrangement
Consider forming factors, use one module and two cavities
(3) Determine cup holder mould gating system
Product appearance and mold manufacturing, the mould adopts the
direct form of point gate, progresses from the main core glue, it
is because of some problems of product appearance structure, and
into glue point is at the bottom of the cup holder, not affect the
appearance.
(4) Determine cup holder mould the demoulding method
Using the role of the spring force to open mold, when mold cavity
to the distance, because the distance pin, dynamic model to
separate at the same time, using the fixed pin up some little guy
out of a shampoo bottle cap, which makes plastic parts will follow
the move mould movement, after the separation to a certain
distance, this time using the push rod can push to take off the
left on the moving mould plastic parts, the push rod is fixed in
the mold of the push rod on the fixed plate, the injection molding
machine ejection device, realizes the parts fall off, and to rely
on the role of the spring force to reset the reset lever.
(5) Determine cup holder mould the cavity and core structure and
the fixed way
Because the internal structure of the complex parts, the dynamic
model of reason the mould (cavity) is the application of insert or
the composite structure on the mold (core) is the positioning screw
and plate fixed structure, it can be replaced after being worn out.
(6) Determine cup holder mould the cooling and exhaust
The moving mould cooling system design for series cooling way,
using the brass insert mold cooling hole series cooling. Exhaust is
mainly through the parting surface clearance, and need not to open
special exhaust slot.
Part Three: Mould Making Procedure
| 1 | Quotation
| Need 2D/3D drawing or Samples |
| 2 | Mould Design | Mould design drawing could be sent for confirmation in one week after receiving the down payment |
| 3 | Mould Making | Start mould manufacturing only after the mould design is confirmed by customers |
| 4 | Mould Trial | 1st shot samples will be available for checking |
| 5 | Sample Confirmation | Customer to check and confirm samples |
| 6 | 2nd Payment | Customer need to pay for the 2nd payment once received the T1 shot samples |
| 7 | Mould Modification | Modify the mould if necessary |
| 8 | Mould Delivery | To deliver the mould after received the 3rd payment |
| 9 | After-Sales Service | Free of charge for 12 months warranty |
| 10 | Unpaid Balance | Customer need to pay for the balance after molds having been shipped out two months |
Attention:
Pease offer the following information when you send us the mould
inquiry:
a) product drawing or the sample photo with sizes.
b) mould steel you want to use.
c) standard mould base or not.
d) runner system you want(cold or hot)
Part Four: Product Showing
RFQs are always welcome, we sincerely hope to cooperate with customers from home and abroad.
Kindly contact me if any questions. It is our pleasure to be on service of you.
Looking forward to receiving your letter.
