Shanghai Changyue Automation Machinery Co., Ltd. |
Verified Suppliers
|
|
Mini Hydraulic Space Saving Tilting Car Parking Machine
Characteristics
Tilting Parking Lift
1. This mini type tilting parking lift is simple in
structure, convenient inf operation, easy to maintain and repair.
2. It is suitable for limited height area; especially in basement
or corners of an apartment;
3. The structure of this type adopts a tilting design of the upper
car to make full use of the space;
4. When taking the above car, the below car needs to drive a
way or remove with a remover. The pit type does not require to
remove, but the civil construction cost is higher than the ground
type.
5. Hydraulic drive with lowest noise and steady operation;
6. Anti-fall device for safety guarantee.
7. Safe and convenient design without construction foundation
requirements.
Advantages
1. First safety control with protective devices
1) Anti-dropping device: to prevent the vehicle loading pallet from
undesired disconnection.
2) Limited switch device to protect the equipment running.
3) Photoelectric switch (device for checking the entrance of people
and vehicles) to prevent the people from accidentally entering into
the equipment under operation.
4) Emergency switch: the emergency switch button is used to cut
power off when there is anything abnormal during the equipment
process.
2. Oil cylinder
Used cylinder reversal, have many advantages, not distortion,
dustproof. Adopt Italy Aston Seal ring.
3. Adjusting lifting height, the maximum lifting height can be
1800mm for 2000KG car.
4. Lifting capacity can be 2000kgs;
5. Hydraulic drive, chain balancing device to ensure the balance
both ends of rise and fall;
6. Low noise, smooth operation, save energy, low carbon and
environmental protection;
7. Vehicle loading pallet fully enclosed design, to avoid oil
leakage, rain and snow polluting the lower vehicles;
8. Structure all adopts layer cutting, attractive appearance, easy
installation, less malfunctions, easy maintenance.
9. Plastic spraying high quality coating, high anti-corrosion
ability, long life. Electrical and driving parts with waterproof
characteristics;
10. Simple structure, easy installation, minimal requirements for
civil engineering;
11. Certifications: CE
Technical Parameters
Item | Parameters |
Name | Tilting parking lift |
Car size | 5000mmX1850mmX1550mm |
Car weight | 2000kg |
Parking cars | 2 |
Mode of drive | hydraulic |
Parking way | Ground car: Forward into Pallet car: Reverse into |
Electricity | 220V 50HZ 1 phase; 380V 50HZ 3 phases 5 wires |
Voltage of control | AC24V |
Warming devices | Yes |
Lift time | 24S |
Falling time | 24S |
Mode of Lift | Intellectual cylinders |
Motor power | 2.2KW |
Electricity | 50HZ, 220V, 1P/380V, 3P; |
Project case