Matte Heavy Grain Surface 6.0μM Laminated Steel Plate

Matte Heavy Grain Surface Aluminum Laminated Steel Plate For PVC Prelam Inlay Laminating

Production Specification

1.Matte Heavy Grain Surface Aluminum Laminated Steel Plate Introduction

Grain Finish Aluminum Plate - Card Laminated Steel Plates are used for laminating plastic card sheets in the card laminator. It can ensure perfect plastic card surface finish after lamination . Our plates are being widely used by many card factories in both China and foreign countries worldwide.

And we also call the plate as Heavy / Middle / Slight Grained laminating steel plate, Grained steel plate for card laminator, Grained card finish lamination plate .

2.Matte Heavy Grain Surface Aluminum Laminated Steel Plate Specification

Technical Parameters :

Plate size(L×W): A4, A3 or custom-made size

Plate thickness: 0.6mm, 0.8mm (Thickness tolerance: ±0.05mm)

Dimension tolerance: ±1mm for length and width.

Plate flatness level: maximum 1 mm / m

Surface roughness value range: 2.5 - 6.0 μm

Slight Grain Steel plate ( Ra 2.5 - 3.0 μm )

Heavy Grain Aluminum plate ( Ra 5.5- 6.0 μm )

Surface hardness: HRC80±20

Thermal transmission: 0.04cal/℃.cm.sec at 20℃

Packaging box: solid plywood carton with soft cushion protection inside.

Key Features:

1. The two sides are covered with protection foils (blue thin films) to ensure good protection on both surfaces . There is no glue left after the foil is removed before the plate is used at the first time .

2. Two sides are made slight grain in the same quality .

3. There are no scratches , dents, stripes shadows and dust on plate surfaces .

4. The edges are smooth and deburred with the round curved corners .

5. After lamination , the plates are not sticking to the laminated plastic sheets .

Technical Parameters:   

3.Application of Matte Heavy Grain Surface Aluminum Laminated Steel Plate

* Customer design can be accept.

4.Packing of Matte Heavy Grain Surface Aluminum Laminated Steel Plate