|
[China]
Trade Verify
Address: F4, Building#1, Shijihuayuan, Dagang, Binhai New Area, Tianjin, China 300270
Contact name:SAM BIN
MKarte Material Technology (Tianjin) Limited |
|
Verified Suppliers
|
|
|
Water Based PVC Coated Overlay or Film MCO-W ( longer aging life and strong adhesion level ) for card laminator use
Water Based PVC Coated Overlay or Film MCO-W is applying the
speical water-based coating material as the glue coating.
it is suitable for laminating with most PVC sheets printed by various
printers. It features high adhesion, no color change and
deformation.
It is applicable to almost all sheets printed by various ink. It
features excellent peeling strength and long aging time.
Product Technical Parameters:
| Item | Parameters |
| Vicat softening point | 72±2 ℃ |
| Heating Shrinkage ratio | ≤10 % |
| Color | transparent after lamination |
| Normal thickness in mm | 0.04,0.05,0.06,0.08,0.10 |
| Peel Strength (90°, 300mm/min) | ≥6.0 N/cm |
| Aging time (65℃ temp./95% humidity ) | ＞200 hours |
| Suitable ink | offset and silk screen printing UV ink, Pigment and dye ink for inkjet printing as well as digital printing ink |
1. Size: in reel or sheet, A4, A3 or as per customer requirements
2. Normal thickness: 0.04,0.05,0.06,0.08,0.10mm
3. Color: transparent with one-side glue coating.
4. Package method: by reel or 500 sheets per bag/4-8 bags per paper carton, or as per customer requirements. All the cartons are firmly piled up and fixed on the solid plywood pallet.
5. Storage condition: Sealed, moisture-proof, room temperature under 40℃, Keep it horizontally, avoid heavy pressing and direct sunlight.
