Roughness 3.0-6.0um Laminated Steel Plate With Decorative Heavy Grained Finish

Heavy Grained Finish Aluminum Plate(roughness 3.0-6.0 um) - Laminated Plates For Plastic Card Laminating

Product Specification:

Heavy Grained Finish Aluminum Plate - Card Laminated  Plates are used for laminating plastic card sheets in the card laminator. It can ensure perfect plastic card surface finish after lamination . Our plates are being widely used by many card factories in both China and foreign countries worldwide.

And we also call the plate as Heavy / Middle / Slight Grained laminating aluminum plate, Grained plate for card laminator, Grained card finish lamination plate .

Key Features:

1. The two sides are covered with protection foils (blue thin films) to ensure good protection on both surfaces . There is no glue left after the foil is removed before the plate is used at the first time .

2. Two sides are made heavy grain in the same quality .

3. There are no scratches , dents, stripes shadows and dust on plate surfaces .

4. The edges are smooth and deburred with the round curved corners .

5. After lamination , the plates are not sticking to the laminated plastic sheets .

Technical Parameters :

Plate size(L×W): A4, A3 or custom-made size

Plate thickness: 0.8mm (Thickness tolerance: ±0.05mm)

Dimension tolerance: ±1mm for length and width.

Plate flatness level: maximum 1 mm / m

Surface roughness value range: 3.0 - 6.0 μm

Heavy Grain Aluminum plate ( Ra 3.0 - 6.0 μm )

Surface hardness: HRC80±20

Thermal transmission: 0.04cal/℃.cm.sec at 20℃

Packaging box: solid plywood carton with soft cushion protection inside.

Technical Parameters:   

* Customer's design can be accepted.